Ip Igmp Immediate-Leave - Allied Telesis IE220 Series Manual

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP IMMEDIATE LEAVE

ip igmp immediate-leave

Overview In IGMP version 2, use this command to minimize the leave latency of IGMP
memberships for specified multicast groups. The specified access list number or
name defines the multicast groups in which the immediate leave feature is
enabled.
Use the no variant of this command to disable this feature.
ip igmp immediate-leave group-list
Syntax
{<access-list-number>|<access-list-number-expanded>|
<access-list-name>}
no ip igmp immediate-leave
Default Disabled by default.
Mode Interface Configuration for a VLAN interface.
Usage notes This command applies to VLAN interfaces configured for IGMP, IGMP Snooping, or
IGMP Proxy.
Example The following example shows how to enable the immediate-leave feature on the
VLAN interface vlan2 for a specific range of multicast groups:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config)#
Related ip igmp last-member-query-interval
commands
C613-50644-01 Rev B
Parameter
<access-list-number>
<access-list-number-expanded>
<access-list-name>
configure terminal
interface vlan2
access-list 34 permit 225.192.20.0 0.0.0.255
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Access-list number, in the range <1-99>.
Access-list number (expanded range), in
the range <1300-1999>.
Standard IP access-list name.
ip igmp immediate-leave group-list 34
exit
974