Show Exception Log - Allied Telesis AT-x510-28GTX Command Reference Manual

L C
OGGING OMMANDS

SHOW EXCEPTION LOG

show exception log
Overview This command displays the contents of the exception log.
show exception log
Syntax
Mode User Exec and Privileged Exec
Example To display the exception log, use the command:
awplus#
Output Figure 9-2:
awplus#show exception log

Stack member 1:

<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:3746)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-3746.tgz
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:2504)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-2504.tgz
2014 Jan 27 09:58:02 local7.debug awplus corehandler : Process ospfd (PID:1512)
signal 5, core dumped to /flash/ospfd-x610-5.4.3-3.7-1-1390816682-1512.tgz
-------------------------------------------------------------------------
Stack member 2:

<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Jan 27 09:58:16 local7.debug awplus-2 corehandler : Process imi (PID:1427)
signal 5, core dumped to /flash/imi-x610-5.4.3-3.7-2-1390816696-1427.tgz
-------------------------------------------------------------------------
C613-50102-01 REV C
show exception log
Example output from the show exception log command on a
device
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
377