Show System Interrupts - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM INTERRUPTS

show system interrupts
Overview Use this command to display the number of interrupts for each IRQ (Interrupt
Request) used to interrupt input lines on a PIC (Programmable Interrupt Controller)
on your device.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system interrupts
Syntax
Mode User Exec and Privileged Exec
Example To display information about the number of interrupts for each IRQ in your device,
use the command:
awplus#
Output Figure 5-18: Example output from the show system interrupts command
awplus#show system interrupts

CPU0
1: 2040274
2: 5705
4: 1
5: 0
6: 0
7: 3
8: 48961
9: 0

Err: 0
...
Related show system environment
Commands
613-50157-01 Rev C
C
ONITORING OMMANDS
show system interrupts
GIC 27 Edge
GIC 105 Level
GIC 104 Level
GIC 117 Level
GIC 118 Level
GIC 116 Level
GIC 221 Level
pca953x 0 Edge
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Disabled 1 iproc_gtimer
Enabled 0 serial
Enabled 0 ehci_hcd:usb1, ohci_hcd:usb2
Enabled 0 18008000.i2c
Enabled 0 3200000.i2c
Enabled 0 gpio_ccg
Enabled 0 linux-kernel-bde
Enabled 0 pluggable-detect
"Getting Started
Guide.
220