Chapter 8 Installing Optional Products
>
8.2 Drive Enclosure Installation
8.2.4
Additional Drive Enclosure Installation
This section describes how to install a drive enclosure for the ETERNUS DX60/DX80/DX90.
Procedure
1
2
3
4
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
First check that all the components of the ETERNUS DX60/DX80/DX90 are in
normal status, using the Storage System Status screen of GUI.
Wear a wrist strap.
For how to wear a wrist strap, refer to
Click [Add Drive Enclosure] under the [Hardware Maintenance] menu on the
[Maintenance] tab in the GUI screen.
The [Add Drive Enclosure] initial screen appears.
Click the [Next >] button.
Figure 8.3
[Add Drive Enclosure] initial screen
"3.6 Wearing the Wrist Strap" (page
198
81).
Copyright 2010 FUJITSU LIMITED