Storage Management (Initial Setup 1) - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 3 General Settings
3.3

Storage Management (Initial Setup 1)

Password: root (by default)
After logging in, the Initial Setup screen of ETERNUS Web GUI appears.
3.3 Storage Management (Initial Setup 1)
Perform the settings that are required before operation of the ETERNUS DX by using the Initial Setup 1 screen
of ETERNUS Web GUI.
Perform the following settings according to the wizard screen:
Set Storage System Name
•
Change User Password
•
Set Thin Provisioning
•
Register SED Authentication Key
•
Setup Network Environment
•
The procedure for initial setup is shown below. For details on the settings, refer to "Configuration Guide (Web
GUI)".
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
40
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0