Show Ip Bgp Neighbors - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Labels

14.8.69 show ip bgp neighbors

This command displays information about state and current activity of connections with
the BGP4 peers.
Format
Modes
Remote Address
Peer ID
Peer Admin
Status
Peer State
Local Port
Remote AS
Remote Port
Connect Retry
Interval
Confederation
Member
Optional
Capabilities
Route Reflector
Mode
Next Hop Self
Mode
Authentication
Code
Routing Commands
This shows the labels for this entry in the BGP4 route table
show ip bgp neighbors <peeripaddr>
Privileged EXEC
User EXEC
The remote IP address of the BGP4 peer.
This is the unique identification number of the peer.
This states whether or not the peer is enabled.
This represents the state of the peer connection.
This is the local port of the BGP4 router.
This is the remote AS number of the BGP4 peer.
This is the remote port of the BGP4 peer.
This is the time interval in seconds for the connection retry.
This field indicates whether or not the peer is enabled as a
confederation member.
This lists the optional capabilities supported by the BGP4
router.
This states whether or not the peer is a route reflection client.
This states whether or not the BGP4 router will configure
itself as the next hop for the locally originated paths.
This is the authentication mechanism being used between the
peers.
v1.0, December 2005
14-97