Operation; Toner Collection Control; Toner Collection Box Control; Box Full Control - Develop ineo+ 6500 Service Manual

14. TONER COLLECTION SECTION

14.3 Operation

14.3.1

Toner collection control

• Toner collection section is driven by the transfer belt motor (M18) and the paper feed motor (M41).
• Collecting toner is performed by the M18 that drives the transfer belt and the paper feed operation driven
by the M41.
14.3.2

Toner collection box control

• The presence of toner collection box is detected by on/off of the waste toner door sensor (PS60).
14.3.3

Box full control

• When the waste toner full sensor (PS52) is turned on, a warning message is displayed on the touch panel.
• There is a box full counter in the NVRAM board (NRB). After the PS 52 is turned on, the counter starts
counting.
• For operation details, refer to the table blow.
PS60 PS52
ON OFF
ON ON
ON ON
64
Box full counter
—
Less than 2500
2500 or more
Theory of Operation Ver1.0 Sep.2006
Operation
Print available
• Warning message is displayed on the touch panel when
the PS52 turns on.
• After the PS52 turns on, printing is available unless the
count exceeds 2500.
• Rejects incoming new jobs
• Job in progress is continued 3000 is counted.
• Print stopped at 3000 counts