Operation; Stapler Movement Control - Develop ineo+ 6500 Service Manual

7. STAPLER SECTION
7.3

Operation

7.3.1

Stapler movement control

For stapler movements, there are two types, that is, the horizontal movement of the stapler intervals and the
rotation of the stapler /Rr. Movement is made according to the staple mode.
The horizontal movement of the stapler is made by the stapler movement motor (M11). The stapler /Rr and the
stapler /Fr are fixed on the upper side and the lower side of a belt that forms a loop and moved respectively in
the opposite direction by the motor M11.
The home position of the horizontal movement is detected by the stapler movement home sensor (PS11).
The 45° rotational movement of the stapler /Rr for the one-corner stapling at rear is made by the stapler rotation
motor (M4).
The home position of the rotational movement is detected by the stapler rotation home sensor (PS14).
A. 1 staple
(1) 1 staple/at front
When the start signal is turned ON, the stapler movement motor (M11) also turns ON to move the stapler to the
position according to the paper size.
(2) Size movement in 1 staple/one-corner stapling at rear
When the start signal is turned ON, the stapler movement motor (M11) turns ON to move the stapler to the posi-
tion according to the paper size. After a specified period of time, the stapler rotation motor (M4) also turns ON to
rotate the stapler /Rr and move it diagonally.
When a staple empty condition of the stapler /Rr is detected at the one-corner stapling at rear, M4 is driven to
replace the cartridge and the stapler is returned to its vertical position.
B. 2 staples
When the start signal is turned ON, the stapler movement motor (M11) also turns ON to move the stapler to the
position according to the paper size.
28
Theory of Operation Ver2.0 Sep.2006