Image Stabilization Control; Outline; Operation Flow; Image Stabilizing Controls When The Sub Power Switch (Sw2) Is On - Develop ineo+ 6500 Service Manual

23. IMAGE STABILIZATION CONTROL

23. IMAGE STABILIZATION CONTROL

23.1 Outline

• This unit carries out various image stabilizing controls in order to achieve stable high print quality.
• The image stabilizing controls carried out during printing are different from those carried out when the sub
power switch (SW2) is turned on.

23.2 Operation flow

23.2.1 Image stabilizing controls when the sub power switch (SW2) is ON, during printing, and dur-
ing idling
An operation flow when the sub power switch (SW2) is ON, during printing, and during idling is described in the
figure below.
When the sub power switch (SW2) is turned ON: Carries out the controls from A to H.
During printing and idling: Carries out the controls from D to H.
A. Drum rotation control
C. Color registration adjustment
D. PGC sensor baseline correction control 1
E. Maximum density correction
D. PGC sensor baseline correction control 2
110
MPC/APC
F. V0 correction
G. Vm correction
H. Gamma correction
Theory of Operation Ver1.0 Sep.2006
B. Environmental decision control
a03ut2c085ca