Second Transfer Process (Step 5) - Develop ineo+ 6500 Service Manual

6. IMAGE CREATING PROCESS
6.6

Second transfer process (Step 5)

Transferring the complete toner image formed on the transfer belt to paper is called as "second transfer." For the
second transfer, the second transfer roller/Lw located at the back side of the transfer belt rotates to transport
paper applying a pressure on the belt, while a high negative DC bias is applied to the second transfer roller/Up
inside the belt.
Because of a potential difference between the two rollers, the toner image can be transferred to the paper from
the belt.
[1] Transfer belt
[2] Paper
16
[4]
[3]
Theory of Operation Ver1.0 Sep.2006
[1]
[2]
[3] Second transfer roller /Lw
[4] Second transfer roller /Up
a03ut2c007ca