Develop ineo+ 6500 Service Manual page 619

8. BUNDLE PROCESSING SECTION
B. Control
The bundle registration motor (M12) rotates in the reverse direction when the main body start signal turns ON
and the registration claws move to the standby position in accordance with the paper size [2].
The bundle registration motor (M12) rotates in the reverse direction to conduct the paper conveyance assisting
operation [4] and the preregistration operation [5] after a specified period of time since the bundle clip motor
(M11) starts conveying the paper [3]. Then M12 stops when the registration claws reach at the specified posi-
tion.
M12 rotates in the reverse direction and conducts the registration operation [7] with the registration claws when
the bundle press motor (M23) completes the press releasing operation [6]. The registration claws stop when the
trimmer registration sensor (PS55) turns ON [8].
M12 rotates in the forward direction to move the registration claws to the specified shelter position [10] when
M23 completes the press operation [9].
M12 rotates in the forward direction to let the bundle exit claws push the paper to conduct the paper exit oper-
ation [12] after a specified period of time since the trimmer blade motor (M31) completes the trimming operation
[11]. M12 stops when the bundle registration home sensor (PS34) turns ON [13]. M12 rotates in the reverse
direction to move the bundle exit claws to the standby position [14] after a specified period of time. Then it
stands by for the subsequent set.
Forward
Bundle clip
motor (M11)
Reverse
Forward
Bundle press
motor (M23)
Reverse
Bundle registra- Forward
tion motor
Reverse
(M12)
Trimmer registration sensor (PS55)
Trimmer blade motor (M31)
Bundle registration home sensor (PS34)
[1] Main body start signal
[2] Moved to the standby position
[3] Conveyance by the bundle clip started
[4] Paper conveyance assisted
[5] Pre-registration
[6] Press release
[7] Registration
98
[2] [3] [4]
[1]
Theory of Operation Ver2.0 Sep.2006
[5] [6] [9][10]
[7] [8]
[8] Registration operation completed
[9] Paper press completed
[10] Shelter operation
[11] Trimming completed
[12] Paper exit operation
[13] Home position detected
[14] Moved to the standby position
[12] [14]
[13]
[11]
15ant2c106 na