Transfer Belt Cleaning (Sub Step 3) - Develop ineo+ 6500 Service Manual

Theory of Operation Ver1.0 Sep.2006

6.10 Transfer belt cleaning (Sub step 3)

The toner remains slightly on the transfer belt after the second transfer. The process that cleans the remaining
toner off is called "Transfer belt cleaning".
The transfer belt cleaning is made by the cleaning blade. Its edge made of urethane rubber scrapes the toner off
the belt surface.
[1] Transfer belt
[2] Remaining toner
[3]
[2]
6. IMAGE CREATING PROCESS
[1]
[3] Cleaning blade
a03ut2c011ca
19