Develop ineo+ 6500 Service Manual page 460

Theory of Operation Ver1.0 Sep.2006
(2) Saddle stitching mode
Transmitting the FNS signal from the main body [1], the saddle stitching stopper motor (M18) rotates [2] to move
down the saddle stitching stopper to the stopping position in accordance with the paper size.
After completing the stapling operation [3], the alignment motors /Up (M5) and /Lw (M16) open the alignment
plate and M18 rotates [4] to move down the saddle stitching stopper to the folding position.
After completing the folding operation, when the folding paper exit sensor (PS25) detects the trailing edge of the
paper bundle, M18 rotates [5] to move up the saddle stitching stopper to the saddle stitching position in accor-
dance with the paper size and stand by for the paper of the subsequent copy.
Stapler motor /Fr (M14)
Clincher motor /Fr (M15)
Stapler motor /Rr (M9)
Clincher motor /Rr (M10)
Alignment motor /Up (M5)
Alignment motor /Lw (M16)
Saddle stitching stopper home sensor (PS23)
Saddle stitching stop-
per motor (M18)
Folding paper exit sensor (PS25)
[1] FNS start signal turned ON
[2] Moving to the saddle stitching position for
the paper size
[3] Stapling operation
UP
DOWN
[1] [2]
[3]
[4]
[4] Moving to the folding position for the paper size
[5] Moving to the saddle stitching position for
the subsequent copy
6. STACKER SECTION
[5]
15jmt2c006na
35