Page 1 Dynamic balance www.develop.eu Quick Guide Copy/Print/Fax/Scan/Box Operations ineo 220/280/360...
Page 3: Table Of Contents
Turning off the machine ........................1-34 1.14 Loading paper ..........................1-35 Loading paper into tray 1/tray 2/tray 3/tray 4 .................. 1-35 Loading paper into the LCT ......................1-37 Loading paper into the bypass tray ....................1-39 ineo+ 220/280/360 (Version 3) Contents-1...
Page 4 Reducing paper use while copying ....................3-5 Double-sided copying........................3-5 Combined copies..........................3-6 Copying a large number of document pages at one time............3-8 Separate Scan ........................... 3-8 Producing a booklet from copies ....................3-10 Booklet............................. 3-10 Booklet Original..........................3-11 Contents-2 ineo+ 220/280/360 (Version 3)
Page 5 Adding text and images when printing ..................4-14 Watermark............................4-14 Overlay ............................. 4-14 Copy Security ..........................4-14 Date/Time and Page Number ......................4-15 Header/Footer..........................4-15 Adjusting the image quality......................4-16 Select Color and Quality Adjustment....................4-16 Color Settings ..........................4-16 ineo+ 220/280/360 (Version 3) Contents-3...
Page 6 Transmitting with the background color adjusted ..............6-18 Background Removal ........................6-18 Transmitting with shadows erased ..................... 6-20 Frame Erase ............................. 6-20 Transmitting to multiple recipients ..................... 6-22 Searching for a registered destination ..................... 6-22 Contents-4 ineo+ 220/280/360 (Version 3)
Page 7 Glossary ............................11-3 11.2 Trademarks and copyrights ......................11-5 OpenSSL Statement ........................11-6 NetSNMP License..........................11-7 Kerberos............................11-9 WPA Supplicant ..........................11-11 Mersenne Twister........................... 11-12 Copyright ............................11-12 Note ............................... 11-12 11.3 SOFTWARE LICENSE AGREEMENT ..................11-13 ineo+ 220/280/360 (Version 3) Contents-5...
Page 8 ICC Profile for TOYO INK Standard Color on Coated paper (TOYO Offset Coated 3.0) ..11-16 11.6 DIC STANDARD COLOR PROFILE LICENSE AGREEMENT............ 11-17 11.7 i-Option LK-105 (Searchable PDFs) End User License Agreement........11-19 Index Contents-6 ineo+ 220/280/360 (Version 3)
Page 9: Introduction
Introduction...
Page 11: Energy Star
"low-power ® mode" after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. ineo+ 220/280/360 (Version 3)
Page 12: Safety Information
• Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock. ineo+ 220/280/360 (Version 3)
Page 13: Ineo+ 220/280/360 (Version 3)
• Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates be- tween the plug terminals may cause a fire. ineo+ 220/280/360 (Version 3)
Page 14 Immediately turn OFF the pow- er switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. ineo+ 220/280/360 (Version 3)
Page 15: Ineo+ 220/280/360 (Version 3)
The product may also be damaged or malfunction. When the optional Fax Kit FK-502 is not installed: Before successive holidays CAUTION • Unplug the product when you will not use the product for long periods of time. ineo+ 220/280/360 (Version 3)
Page 16: Regulation Notices
Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation. This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous laser radiation. ineo+ 220/280/360 (Version 3)
Page 17: Internal Laser Radiation
Regulation notices Internal laser radiation Maximum Average Radiation Power: 8.0 μW (ineo+ 360/280)/5.3 μW (ineo+ 220) at the laser aperture of the print head unit. Wavelength: 770-800 nm This product employs a Class 3B laser diode that emits an invisible laser beam.
Page 18: For Denmark Users
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksan-visning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bølge-lengde er 770-800 nm. 1-10 ineo+ 220/280/360 (Version 3)
Page 19: Laser Safety Label
Acoustic noise (for European users only) Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779. ineo+ 220/280/360 (Version 3) 1-11...
Page 20: For Eu Member States Only
To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view. Das Gerät ist nicht fur die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert werden. 1-12 ineo+ 220/280/360 (Version 3)
Page 21: Caution Notations And Labels
Do not remove caution labels or notations. If any caution label or caution notation is soiled, please clean to make legible. If you cannot make them legible, or if the caution label or notation is damaged, please contact your service representative. ineo+ 220/280/360 (Version 3) 1-13...
Page 22: Special Notice To User
In the event of problems, you should contact your equipment supplier in the first instance. The CE marking must be affixed to the product or to its data plate. Additionally it must be affixed to the packaging, if any, and to the accompanying documents. 1-14 ineo+ 220/280/360 (Version 3)
Page 23: Space Requirements
(107) 34-7/8 (886) (365) 43 (1092.2) (321) 360/280/220+DF-617+PC-207+JS-505+MK-713 Unit: inch (mm) NOTICE Be sure to allow a clearance of 200 mm (8 inches) or more at the back of this machine for the ventilation duct. ineo+ 220/280/360 (Version 3) 1-15...
Page 24: Operation Precautions
Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. Precaution on transportation When holding the handle, exercise care not to get your fingers caught between this unit and the handle. 1-16 ineo+ 220/280/360 (Version 3)
Page 25: Legal Restrictions On Copying
This machine provides the forgery prevention function in order to prevent financial instruments from being copied illegally. We appreciate your understanding that printed images may infrequently have some noise or image data may not be stored under certain circumstances due to this forgery prevention function. ineo+ 220/280/360 (Version 3) 1-17...
Page 26: Introduction To The User's Guides
This User’s Guide describes details on the fax driver function that transmits faxes directly from a computer. PC-FAX [User’s Guide Network Administrator] This User’s Guide describes details on setting methods for each function using the network connection. Network settings Settings using Web Connection 1-18 ineo+ 220/280/360 (Version 3)
Page 27 This User's Guide describes details on functions that become available by registering the optional license kit and by connecting to an application. Web browser function Image Panel PDF Processing Function Searchable PDF My panel and My address function ineo+ 220/280/360 (Version 3) 1-19...
Page 28: Available Features
1.10 Available features ineo+ 360/ineo+ 280/ineo+ 220 is a digital color multifunctional peripheral that eases the workflow and satisfies any application or office environment. In addition to the copy, fax, scanning and printing functions essential to any business, this machine provides network and box functions to support efficient document management.
Page 29: Copy Operations
Using this function, each user can use the control panel or address book customized in the same way in any MFP, which is linked to applications. To use these functions, an optional upgrade kit UK-203 and applications are required. ineo+ 220/280/360 (Version 3) 1-21...
Page 30: Control Panel
"Now in Interrupt mode." appears on the touch panel. To cancel Interrupt mode, press the [Interrupt] key again. [Stop] key Pressing this key while copying, scanning or printing temporar- ily stops the operation. 1-22 ineo+ 220/280/360 (Version 3)
Page 31 Press to enter Copy mode. (As a default, the machine is in Copy mode.) While the machine is in Copy mode, the indicator on the key lights up in green. Reference For details, refer to chapter 4 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 1-23...
Page 32: Guidance Function
You can display the functional description and operating procedure in the touch panel. If necessary, you can check something you do not understand on the screen while performing a procedure. Display the Guidance screen. % If the [Guidance] key is pressed, the guidance appears based on the displayed screen. 1-24 ineo+ 220/280/360 (Version 3)
Page 33 Pressing [Consumables Replace/Processing Procedure] utilizes an ani- Processing Procedure] mation to display the procedure for replacing consumables or to empty the punch scrap box with an animation. If [Start Guidance] is pressed, the animation guidance will start. ineo+ 220/280/360 (Version 3) 1-25...
Page 34 Guidance function 1.12 On the Guidance screen, press the button or button number displayed on the screen using the keypad, and select the desired item. Example: [Function] ö [Copy] ö [Color] 1-26 ineo+ 220/280/360 (Version 3)
Page 35 1.12 Guidance function ineo+ 220/280/360 (Version 3) 1-27...
Page 36: Example Of The Guidance Screen
If [Search by Operation] -> [Copying] -> [Copying Special Documents] is selected, instructions and animation are displayed to enable the user to view the procedure for placing an original. However, [Start Guidance] is not displayed in the animation for placing an original. Example: [Function Map] ö [Copy] 1-28 ineo+ 220/280/360 (Version 3)
Page 37: Animation Guidance
You can clear a jam or replace consumables while checking the procedure in the touch panel. Example of paper jam or staple jam processing (Paper jam in tray 1) Press [Start Guidance] to check the operating procedure. ineo+ 220/280/360 (Version 3) 1-29...
Page 38 Guidance function 1.12 Brings you to the following step. Brings you back to the previous step. You can check the procedure again. 1-30 ineo+ 220/280/360 (Version 3)
Page 39 For details on how to clear paper jams or staple jams, refer to page 1-41 of this manual. Example of consumable replacement (Replacement of toner cartridge) Press [Start Guidance] to check the replacement procedure. % Press the [Guidance] key to display the Help Menu screen. ineo+ 220/280/360 (Version 3) 1-31...
Page 40 Guidance function 1.12 Brings you to the following step. Brings you back to the previous step. 1-32 ineo+ 220/280/360 (Version 3)
Page 41 For details on how to replace consumables, refer to page 1-52 of this manual. For details on the Guidance screen, refer to page 1-24 of this manual. ineo+ 220/280/360 (Version 3) 1-33...
Page 42: Turning The Machine On/Off
Do not turn off the machine while it is operating, otherwise data being scanned or transmitted or queued jobs may be deleted. Reference For details, refer to chapter 3 of the [User’s Guide Copy Operations]. 1-34 ineo+ 220/280/360 (Version 3)
Page 43: Loading Paper
Loading paper into tray 1/tray 2/tray 3/tray 4 Follow the procedure described below to load paper into tray 1/tray 2/tray 3/tray 4. Slide the lateral guides to fit the size of paper to be loaded. ineo+ 220/280/360 (Version 3) 1-35...
Page 44 % Up to 500 sheets of plain paper can be loaded. For details on the number of sheets of thick paper that can be loaded, refer to chapter 12 of the [User’s Guide Copy Operations]. Reference For details, refer to chapter 8 of the [User’s Guide Copy Operations]. 1-36 ineo+ 220/280/360 (Version 3)
Page 45: Loading Paper Into The Lct
% Press tray release button to pull out the LCT. % Load the paper so that the surface to be printed on faces upward. % Do not load so many pages that the top of the stack is higher than the , mark. ineo+ 220/280/360 (Version 3) 1-37...
Page 46 % Up to 2,500 sheets of plain paper can be loaded. For details on the number of sheets of thick paper that can be loaded, refer to chapter 12 of the [User’s Guide Copy Operations]. Reference For details, refer to chapter 8 of the [User’s Guide Copy Operations]. 1-38 ineo+ 220/280/360 (Version 3)
Page 47: Loading Paper Into The Bypass Tray
% Do not load so many pages that the top of the stack is higher than the , mark. % Up to 150 sheets plain paper can be loaded. % Slide the lateral guides to fit the size of paper to be loaded. ineo+ 220/280/360 (Version 3) 1-39...
Page 48 220 e 330 mm w and 8 e 13 w. Any one of these sizes can be selected. For details, contact your service representative. Reference For details, refer to chapter 8 of the [User’s Guide Copy Operations]. 1-40 ineo+ 220/280/360 (Version 3)
Page 49: Clearing Paper Jams And Staple Jams
For details on how to clear a staple jam in the saddle stitcher SD-509, refer to page 1-50 of this manual. For details on how to clear a staple jam in the finisher FS-529, refer to page 1-51 of this manual. ineo+ 220/280/360 (Version 3) 1-41...
Page 50: Clearing Paper Jams (Adf)
The following procedure describes how to clear paper jams that have occurred in the ADF. This illustration shows an example where the optional Reverse Automatic Document Feeder DF-617. NOTICE Do not lift the original tray with the original output tray. 1-42 ineo+ 220/280/360 (Version 3)
Page 51: Clearing Paper Jams (Right-Side Door)
Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. ineo+ 220/280/360 (Version 3) 1-43...
Page 52: Clearing Paper Jams (Paper Tray)
To close the upper right-side door, press the center of the upper right-side door to securely close the door. Be careful not to touch the surface of the film or paper take-up roller with your hand. 1-44 ineo+ 220/280/360 (Version 3)
Page 53: Clearing Paper Jams (Finisher Fs-527)
The location of the paper jam in the finisher differs depending on the selected Finishing settings. This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in the optional finisher FS-527. ineo+ 220/280/360 (Version 3) 1-45...
Page 54 This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in the optional finisher FS-527. NOTICE When moving the saddle stitcher, do not grab any part other than the handle, otherwise your hand or fingers may be pinched. 1-46 ineo+ 220/280/360 (Version 3)
Page 55: Clearing Paper Jams (Finisher Fs-529)
The following procedure describes how to clear paper jams that have occurred in finisher FS-529. The location of the paper jam in the finisher differs depending on the selected Finishing settings. This illustration shows an example where the optional finisher FS-529 is installed. ineo+ 220/280/360 (Version 3) 1-47...
Page 56: Clearing Paper Jams (Job Separator Js-505)
Clearing paper jams (Job Separator JS-505) The following procedure describes how to clear paper jams that have occurred in job separator JS-505. This illustration shows an example where the optional job separator JS-505 is installed. 1-48 ineo+ 220/280/360 (Version 3)
Page 57: Clearing Staple Jams (Finisher Fs-527)
The following procedure describes how to clear staple jams that have occurred in finisher FS-527. This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in the optional finisher FS-527. NOTICE Be careful when clearing jammed staples, otherwise you may be injured. ineo+ 220/280/360 (Version 3) 1-49...
Page 58: Clearing Staple Jams (Saddle Stitcher Sd-509)
This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in the optional finisher FS-527. NOTICE When moving the saddle stitcher, do not grab any part other than the handle, otherwise your hand or fingers may be pinched. 1-50 ineo+ 220/280/360 (Version 3)
Page 59: Clearing Staple Jams (Finisher Fs-529)
The following procedure describes how to clear staple jams that have occurred in finisher FS-529. This illustration shows an example where the optional finisher FS-529 is installed. NOTICE Be careful when clearing jammed staples, otherwise you may be injured. ineo+ 220/280/360 (Version 3) 1-51...
Page 60: Replacing Consumables
Waste toner box When the toner is about to run out, the following message appears (If it is replaceable by the user.). Reference For details on the replacement procedure, refer to page 1-55 of this manual. 1-52 ineo+ 220/280/360 (Version 3)
Page 61 For details on the replacement procedure for finisher FS-527, refer to page 1-58 of this manual. For details on the replacement procedure for saddle stitcher SD-509, refer to page 1-59 of this manual. For details on the replacement procedure for finisher FS-529, refer to page 1-60 of this manual. ineo+ 220/280/360 (Version 3) 1-53...
Page 62 Replacing consumables 1.16 When the punch scrap box is full, the following message appears (If it can be emptied by the user). Reference For details on the emptying procedure, refer to page 1-61 of this manual. 1-54 ineo+ 220/280/360 (Version 3)
Page 63: Replacing The Toner Cartridge
Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. ineo+ 220/280/360 (Version 3) 1-55...
Page 64: Replacing The Waste Toner Box
Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. 1-56 ineo+ 220/280/360 (Version 3)
Page 65: Replacing A Drum Unit
Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. ineo+ 220/280/360 (Version 3) 1-57...
Page 66: Replacing The Staple Cartridge (Finisher Fs-527)
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge is removed before the message is displayed, it will result in a failure. Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is replaced. 1-58 ineo+ 220/280/360 (Version 3)
Page 67: Replacing The Staple Cartridge (Saddle Stitcher Sd-509)
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge is removed before the message is displayed, it will result in a failure. Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is replaced. ineo+ 220/280/360 (Version 3) 1-59...
Page 68: Replacing The Staple Cartridge (Finisher Fs-529)
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge is removed before the message is displayed, it will result in a failure. Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is replaced. 1-60 ineo+ 220/280/360 (Version 3)
Page 69: Emptying The Punch Scrap Box
The following procedure describes how to empty the punch scrap box for the finisher FS-527. This illustration shows an example where the saddle stitcher SD-509 and punch kit PK-517 are installed in the optional finisher FS-527. ineo+ 220/280/360 (Version 3) 1-61...
Page 70: Options
This option may not be available depending on the sales area. Working table WT-506 Provides an area to temporarily place an original or other materials. This is also used when the authentica- tion unit is installed. 1-62 ineo+ 220/280/360 (Version 3)
Page 71 LK-102 Enables PDF document encryption with a digital ID, at- taching of a digital signature, and property settings when distributing a PDF document using the scan or User Box function. ineo+ 220/280/360 (Version 3) 1-63...
Page 72 If necessary, you can increase the number of languages, which can be displayed in the control panel of this machine, up to nine. Reference For details, refer to chapter 2 of the [User’s Guide Copy Operations]. 1-64 ineo+ 220/280/360 (Version 3)
Page 73: Basic Operations
Basic operations...
Page 75: Basic Copy Operation
% If a screen for entering the user name/account name and password appears, type in the necessary information, and then press [Login] or press the [Access] key. For details, refer to chapter 10 or chapter 11 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3)
Page 76 % For details, refer to chapter 5 of the [User’s Guide Copy Operations]. Type in the desired number of copies. % To change the number of copies, press the [C] (clear) key, and then type in the desired number. ineo+ 220/280/360 (Version 3)
Page 77 % To interrupt the copy job, press the [Interrupt] key. % To scan the next document while printing (reserve a copy job), position the next document, and then press the [Start] key. % For details, refer to chapter 4 of [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3)
Page 78: Basic Print Operation
Send print data from an application on the computer through the printer driver to this machine. The following printer drivers can be used with this machine. Windows: PCL driver PostScript driver XPS driver Macintosh: OS X PostScript PPD driver OS 9 PostScript PPD driver ineo+ 220/280/360 (Version 3)
Page 79: Before Printing
Network settings can also be specified by using Web Connection. For details, refer to chapter 5, "Printing", of the [User's Guide Network Administrator]. Printing Create a document in the application, and then select the print command. % In the Print dialog box, select the printer. ineo+ 220/280/360 (Version 3)
Page 80 Basic print operation % If necessary, display the printer driver settings dialog box, and then specify the printing settings, such as stapling. ineo+ 220/280/360 (Version 3)
Page 81 % If "Secure Print", "Save in User Box" or "Proof Print" was selected from the "Output Method" down- down list in the printer driver, the document is saved in a user box or in the memory of this machine. Print the document by using the control panel of the machine. ineo+ 220/280/360 (Version 3)
Page 82: Basic Fax Operation
% If a screen for entering the user name/account name and password appears, type in the necessary information, and then press [Login] or press the [Access] key. For details, refer to chapter 10 or chapter 11 of the [User’s Guide Copy Operations]. 2-10 ineo+ 220/280/360 (Version 3)
Page 83 For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. Position the document to be faxed. % To scan a document that cannot be loaded into the ADF (a thick document or a document on thin paper), position it on the original glass. ineo+ 220/280/360 (Version 3) 2-11...
Page 84 To stop the transmission after the [Start] key was pressed, press [Job List], then [Job Details], and then delete the job to be stopped. For details, refer to chapter 3 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 2-12 ineo+ 220/280/360 (Version 3)
Page 85 Basic fax operation ineo+ 220/280/360 (Version 3) 2-13...
Page 86: Basic Scan Operation
If user authentication is enabled, you can also use the Scan to Home function that sends the scanned data to your computer or use Scan to Me function that sends the scanned data to your E-mail address. 2-14 ineo+ 220/280/360 (Version 3)
Page 87 11 of the [User’s Guide Copy Operations]. Select the destination. % If destinations are already registered, a registered destination can be selected. For details on registering destinations, refer to page 6-3 of this manual. ineo+ 220/280/360 (Version 3) 2-15...
Page 88 Network settings can also be specified by using Web Connection. For easier operation, specify in advance any settings other than the network settings according to the desired application. For details, refer to chapter 4 of the [User’s Guide Network Administrator] 2-16 ineo+ 220/280/360 (Version 3)
Page 89: Basic Box Operation (Registering User Boxes)
This user box is used when adding an image of the date/time or annotation number to a document data saved in Scan function. This user box is regis- tered in Administrator mode. For details, refer to chapter 8 of the [User’s Guide Box Operations]. ineo+ 220/280/360 (Version 3) 2-17...
Page 90 Basic box operation (registering user boxes) Display the screen for registering user boxes. 2-18 ineo+ 220/280/360 (Version 3)
Page 91 Basic box operation (registering user boxes) Press [New]. % To change the settings for a registered user box, select the user box whose settings are to be changed, and then press [Edit]. ineo+ 220/280/360 (Version 3) 2-19...
Page 92 (for example, "TUV" for a user box with the name "Tokyo office"), the user box can easily be found. Press [Index], and then select the appropriate index characters from those that are displayed. 2-20 ineo+ 220/280/360 (Version 3)
Page 93 We recommend saving data to be shared within a group in group user boxes. ineo+ 220/280/360 (Version 3) 2-21...
Page 94: Basic Box Operation (Saving Data In A User Box)
Data can be saved in boxes from Copy mode, Fax/Scan mode, User Box mode and Printer mode. Saving data in a user box with a Copy mode operation Press [Save in User Box]. Select the user box where the document is to be saved. 2-22 ineo+ 220/280/360 (Version 3)
Page 95 % The document name automatically set as the default is displayed. % To change the document name, press [Document Name], and then use the keyboard that appears in the touch panel to type in the name. Position the document to be saved. ineo+ 220/280/360 (Version 3) 2-23...
Page 96: Saving Data In A User Box With A Fax/Scan Mode Operation
% When saving a document to a user box with a Copy mode function, select "Page Print" to "Yes" to print the document at the same time that it is saved. Saving data in a user box with a Fax/Scan mode operation Press [User Box]. 2-24 ineo+ 220/280/360 (Version 3)
Page 97 Select the user box where the document is to be saved. % The user box can also be specified by pressing [Enter User Box No.], then typing in the box number. % To search for a user box name, press [Search User Box]. ineo+ 220/280/360 (Version 3) 2-25...
Page 98 Data can also be saved in a user box by specifying a user box destination as the recipient of the fax or scan data. For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 2-26 ineo+ 220/280/360 (Version 3)
Page 99: Saving Data In A User Box With A User Box Mode Operation
% For details on functions using an external memory, refer to page 2-36 of this manual. % For details on using a document in a cellular phone or PDA, refer to page 2-44 of this manual. ineo+ 220/280/360 (Version 3) 2-27...
Page 100 % To specify settings such as the image quality and document orientation, press [Scan Settings] or [Original Settings]. For details, refer to chapter 6 of the [User’s Guide Box Operations]. Position the document to be saved. Press the [Start] key. 2-28 ineo+ 220/280/360 (Version 3)
Page 101 % The operation can also be started by pressing [Start]. Reference Print data transmitted via the printer driver can be stored in user boxes. For details on saving data in user boxes using the printer functions, refer to page 4-6 of this manual. ineo+ 220/280/360 (Version 3) 2-29...
Page 102: Basic Box Operation (Using Saved Documents)
Data can more easily be imported from a user box to the computer. For details, refer to page 7-16 of this manual. Also refer to chapter 9 of the [User’s Guide Box Operations]. 2-30 ineo+ 220/280/360 (Version 3)
Page 103: Printing Saved Documents
% For details on functions using an external memory, refer to page 2-36 of this manual. % For details on using a document in a cellular phone or PDA, refer to page 2-44 of this manual. ineo+ 220/280/360 (Version 3) 2-31...
Page 104 Up to 10 data can be printed at the same time. For details, refer to chapter 7, of the [User’s Guide Box Operations]. % Press [Preview] to check the preview image. Press the [Start] key. % The operation can also be started by pressing [Start]. 2-32 ineo+ 220/280/360 (Version 3)
Page 105: Sending Saved Documents
Sending saved documents Select the user box containing the document to be sent, and then press [Use/File]. % If a password has been specified for the user box, type in the password, and then press [OK]. ineo+ 220/280/360 (Version 3) 2-33...
Page 106 6-22 of this manual. % If necessary, press [Communication Settings], and specify the desired settings. For details, refer to chapter 7 of the [User’s Guide Box Operations]. % Press [Preview] to check the preview image. 2-34 ineo+ 220/280/360 (Version 3)
Page 107 Basic box operation (using saved documents) Press the [Start] key. % The operation can also be started by pressing [Start]. ineo+ 220/280/360 (Version 3) 2-35...
Page 108: Using External Memory
For details, refer to chapter 8 in the [User's Guide Box Operations]. Printing a document in external memory Connect the external memory to this machine, and press [Print a document from external memory.]. 2-36 ineo+ 220/280/360 (Version 3)
Page 109 % If an external memory is already connected, press [Use/File] on the screen for User Box function. For details on [Use/File], refer to chapter 7 in the [User's Guide Box Operations]. Select a document and press [Print]. ineo+ 220/280/360 (Version 3) 2-37...
Page 110 % Print settings can be changed when printing a document. For details on how to configure print settings when printing a document, refer to chapter 7 in the [User's Guide Box Operations]. Press [Start]. % You can also press [Start] to start a job. 2-38 ineo+ 220/280/360 (Version 3)
Page 111: Saving A Scanned Document To External Memory
Saving a scanned document to external memory Connect external memory to this machine, and press [Save a document to external memory.]. % If an external memory is already connected, press [Save Document] on the screen for User Box function. ineo+ 220/280/360 (Version 3) 2-39...
Page 112 % The document name can be changed when saving a document. For details on how to configure scan or original settings when saving a document, refer to chapter 6 in the [User's Guide Box Operations]. Place the original and press [Start]. % You can also press [Start] to start a job. 2-40 ineo+ 220/280/360 (Version 3)
Page 113: Saving A Document Stored In External Memory To A User Box
Connect external memory to this machine, and press [Save a document from external memory to a user box.]. % If an external memory is already connected, press [Use/File] on the screen for User Box function. For details on [Use/File], refer to chapter 7 in the [User's Guide Box Operations]. ineo+ 220/280/360 (Version 3) 2-41...
Page 114 Select a document and press [Save to User Box]. Select a User Box. % The document name can be changed when saving a document. Press [Start]. % You can also press [Start] to start a job. 2-42 ineo+ 220/280/360 (Version 3)
Page 115 Using external memory Reference If necessary, a document in a User Box can be saved in external memory. For details, refer to chapter 7 in the [User's Guide Box Operations]. ineo+ 220/280/360 (Version 3) 2-43...
Page 116: Using A Document In A Bluetooth-Compatible Cellular Phone Or Pda
This function may not be available on this machine depending on the cellular phone or PDA model being used or supported file formats. Saving a document stored in a mobile terminal to a User Box Select [Mobile/PDA] and press [Use/File]. 2-44 ineo+ 220/280/360 (Version 3)
Page 117 Using a document in a Bluetooth-compatible cellular phone or PDA Press [Save in User Box]. Select a User Box. ineo+ 220/280/360 (Version 3) 2-45...
Page 118 PDA after the PIN code has been displayed on the control panel. Cellular phone or PDA operations vary depending on the model. For details on cellular phone or PDA operations, refer to the manual of the cellular phone or PDA. 2-46 ineo+ 220/280/360 (Version 3)
Page 119: Printing A Document In Mobile Terminal
Using a document in a Bluetooth-compatible cellular phone or PDA Printing a document in mobile terminal Select [Mobile/PDA] and press [Use/File]. Press [Print List] ineo+ 220/280/360 (Version 3) 2-47...
Page 120 PDA after the PIN code has been displayed on the control panel. Cellular phone or PDA operations vary depending on the model. For details on cellular phone or PDA operations, refer to the manual of the cellular phone or PDA. 2-48 ineo+ 220/280/360 (Version 3)
Page 121: Useful Copy Operations
Useful copy operations...
Page 123: Specifying Basic Settings For Quick Copying
The screen can be customized, for example, with the Quick Copy screen, so that copy functions are more conveniently available. Quick Copy screen Basic copy settings are available in one screen. Press [ ] in the screen to display additional settings, such as other Color settings. ineo+ 220/280/360 (Version 3)
Page 124 Press to display the Original Setting screen. Quality/Density tab Press to display the Quality/Density screen. Application tab Press to display the Application screen. Reference For details, refer to chapter 6 of the [User's Guide Copy Operations]. ineo+ 220/280/360 (Version 3)
Page 125: Reducing Paper Use While Copying
Double-sided copying When printing a large number of single-sided documents, print on both sides of the paper use by half. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3)
Page 126: Combined Copies
Reducing paper use while copying Combined copies Select "2in1", "4in1" or "8in1", depending on the number of pages that can be printed on a single page. Combine these settings with double-sided copying to further reduce paper use. ineo+ 220/280/360 (Version 3)
Page 127 Reducing paper use while copying If "4in1" or "8in1" is selected, the page arrangement can be selected. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3)
Page 128: Copying A Large Number Of Document Pages At One Time
After all document pages are scanned, the copies can be outputted together. This is useful for printing multiple copies of a document containing a large number of pages. Separate Scan Repeat this operation until all document pages have been scanned. ineo+ 220/280/360 (Version 3)
Page 129 To copy documents that cannot be loaded into the ADF, position them on the original glass. Documents can also be scanned in separate batches from the original glass. To change the settings, press [Change Setting]. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3)
Page 130: Producing A Booklet From Copies
"Booklet Original" function is used depends on the layout of the original document. Booklet For a document containing individual pages, select the "Booklet" function. The page order of the scanned document is automatically arranged and double-sided copies are printed. 3-10 ineo+ 220/280/360 (Version 3)
Page 131: Booklet Original
Booklet Original For a pamphlet with its staples removed from the center binding, select the "Booklet Original" function. The document will be copied and bound at the center to create copies like the original pamphlet. ineo+ 220/280/360 (Version 3) 3-11...
Page 132 Producing a booklet from copies Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. 3-12 ineo+ 220/280/360 (Version 3)
Page 133: Erasing Document Shadows From Copies
Erasing document shadows from copies Erasing document shadows from copies Frame Erase Copies can be produced by erasing unwanted areas around the document, such as the transmission information on received faxes and the shadows of punched holes. ineo+ 220/280/360 (Version 3) 3-13...
Page 134 The width of the frame to be erased can be set between 1/16 inch and 2 inches (0.1 and 50.0 mm). Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. 3-14 ineo+ 220/280/360 (Version 3)
Page 135: Printing Copies Enlarged/Reduced On Paper With A Different Size
Printing copies enlarged/reduced on paper with a different size Printing copies enlarged/reduced on paper with a different size Auto zoom Copies can be produced with the zoom ratio automatically selected based on the size of the loaded document and the specified paper size. ineo+ 220/280/360 (Version 3) 3-15...
Page 136 Reference When copying onto paper larger than the document, load the document with the same orientation as the paper. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. 3-16 ineo+ 220/280/360 (Version 3)
Page 137: Copying Book Page Spreads On Separate Sheets Of Paper
A page spread, such as in an open book or pamphlet, can be copied onto separate pages. This function enables you to copy with the ADF open by placing the original on the original glass. If necessary, you can place an original image at the center of the paper. ineo+ 220/280/360 (Version 3) 3-17...
Page 138 Copying book page spreads on separate sheets of paper 3-18 ineo+ 220/280/360 (Version 3)
Page 139 The front cover, separate copies of each page in the page spreads and the back cover are printed in the document page order. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 3-19...
Page 140: Adding Cover Pages While Copying
When copying using paper for cover pages that is different from the paper of the main body of the document, instead of copying the cover pages and document separately, the entire document can be printed at the same time using the different types of paper. 3-20 ineo+ 220/280/360 (Version 3)
Page 141 Use paper with the same size for the cover pages and for the main body of the document, and load them in the paper trays in the same orientation. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 3-21...
Page 142: Binding With Staples And Punching Holes In Copies
The Staple settings are available only if the optional finisher is installed. Holes for filing can be punched in the copies. The Punch settings are available only if the optional punch kit and finisher FS-527 are installed. Punch [2-Hole] Staple [Corner] Staple [2-Position] 3-22 ineo+ 220/280/360 (Version 3)
Page 143 When Finisher FS-527 is installed A3 w to A5 v, 11 e 17 w to 8-1/2 e 11w/v When Finisher FS-529 is installed A3 w to B5 v, 11 e 17 w to 8-1/2 e 11w/v ineo+ 220/280/360 (Version 3) 3-23...
Page 144 The number of punched holes differ depending on the country (region) where the unit is installed. For details, contact your service representative. Reference For details, refer to chapter 5 of the [User’s Guide Copy Operations]. 3-24 ineo+ 220/280/360 (Version 3)
Page 145: Copying Onto Envelopes
When copying onto envelopes, the orientation of the document and paper is extremely important. Position the document and the paper. Original Envelope Print Side % Load with the side to be printed on facing down. ineo+ 220/280/360 (Version 3) 3-25...
Page 146 % If envelopes are loaded, select the [Envelope] Paper Type setting. Select a size that matches the size of the envelope that is loaded. Reference For details, refer to chapter 5 and chapter 8 of the [User’s Guide Copy Operations]. 3-26 ineo+ 220/280/360 (Version 3)
Page 147: Easily Recalling Frequently Used Functions
Easily recalling frequently used functions Registering/recalling programs Frequently used functions can be registered as a copy program. The registered copy program can easily be recalled and used. Registering a program First, specify the functions to be registered. ineo+ 220/280/360 (Version 3) 3-27...
Page 148 Easily recalling frequently used functions 3.11 Reference A maximum of 30 copy programs can be registered. Recalling a program 3-28 ineo+ 220/280/360 (Version 3)
Page 149: Shortcut Keys/Quick Settings
The frequently used functions can be created as shortcut keys or easy setting keys on the basic settings screen. Up to two shortcut keys can be created. Up to four easy setting keys can be created. ineo+ 220/280/360 (Version 3) 3-29...
Page 150 Easily recalling frequently used functions 3.11 3-30 ineo+ 220/280/360 (Version 3)
Page 151 When the optional image controller IC-412 v1.1 is installed, only one shortcut key can be enabled. If two shortcut keys are configured, [Language Selection] is not displayed. Reference For details, refer to chapter 6 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 3-31...
Page 152: Checking The Copies
Before printing a large number of copies, a single proof copy or print image can be checked as a preview image. This allows copy errors to be corrected before a large number of copies are printed. Select the desired copy settings. Select the check mode. 3-32 ineo+ 220/280/360 (Version 3)
Page 153: To Print And Check
3.12 Checking the copies To print and check A single copy is printed. Check the proof copy. ineo+ 220/280/360 (Version 3) 3-33...
Page 154 To change the selected settings after checking the proof copy, press [Change Setting], and then change the settings. If the original was loaded into the ADF, printing of the proof copy begins without the sereen appearing confirming that scanning of the original is finished. 3-34 ineo+ 220/280/360 (Version 3)
Page 155: To Check With Preview Image
To check with preview image Reference To change the settings after checking the preview image, press [View Pages], and then change the settings. Reference For details, refer to chapter 4 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 3-35...
Page 156: Checking The Number Of Prints
Checking the number of prints 3.13 3.13 Checking the number of prints Meter Count The total number of printed pages and detailed counts of prints, such as the number of black-and-white prints, can be checked for various functions. 3-36 ineo+ 220/280/360 (Version 3)
Page 157 Color" setting, and the "2 Color" setting. Reference To print the list, press [Print List]. To view the amount of toner that was used, press [Coverage Rate]. Reference For details, refer to chapter 8 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 3-37...
Page 158: Reducing Electricity Usage
Instead of waiting the specified length of time, the machine can be manually set to enter a power-saving mode in order to conserve energy. As a factory default, the machine is set to enter Low Power mode when the [Power Save] key is pressed. 3-38 ineo+ 220/280/360 (Version 3)
Page 159: Weekly Timer
The limitations of the weekly timer can temporarily be canceled so the machine can be used. In order to cancel the limitations, the operating hours must first be entered. A password for non-business hours must be specified in Administrator mode. ineo+ 220/280/360 (Version 3) 3-39...
Page 160 Reducing electricity usage 3.14 3-40 ineo+ 220/280/360 (Version 3)
Page 161: Useful Printing Operations
Useful printing operations...
Page 163: Selecting The Paper
Select the paper size of the document and the size of paper to be printed on. Original size Paper size Windows PCL/PS/XPS drivers: Basic tab Macintosh OS X driver: Page Attributes Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 164: Zoom
Tray Windows PCL/PS/XPS drivers: Basic tab Macintosh OS X driver: Paper Tray/Output Tray Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 165: Copies And Collate/Offset
Macintosh OS X driver: Output Method Reference The "Offset" function is available only with finishers that allow pages to be shifted. Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 166: Managing And Limiting Printing
Windows PCL/PS/XPS drivers: Basic tab Macintosh OS X driver: Output Method Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 167: Proof Print
User verification account verfication User ID or account name Windows PCL/PS/XPS drivers: Basic tab Macintosh OS X driver: Output Method Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 168: Id & Print
Because printing occurs after user authentication is performed via the control panel of this machine, it is suitable for printing highly confidential documents. User verfication Windows PCL/PS/XPS drivers: Basic tab Macintosh OS X driver: Output Method Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 169: Reducing Paper Use While Printing
The "Skip Blank Pages" function, which does not print blank pages when printing from the Windows PCL/XPS driver, is useful for reducing paper use. Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3)
Page 170: Adjusting The Print Position
Top shift Left shift Right shift Bottom Bottom shift shift Windows PCL/PS/XPS drivers: Layout tab Macintosh OS X driver: Layout/Finish Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. 4-10 ineo+ 220/280/360 (Version 3)
Page 171: Finishing Documents
The Center Staple and Fold, and Fold settings are available only if the optional finisher FS-527 and saddle stitcher have been installed. Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3) 4-11...
Page 172: Adding Different Paper
Interleaves can be fed out between OHP transparencies when they are printed on. Windows PCL/PS/XPS drivers: Cover Mode tab Macintosh OS X driver: Cover Mode/Transparency Interleave Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. 4-12 ineo+ 220/280/360 (Version 3)
Page 173: Per Page Setting
Pages 3 through 6: Printed double-sided with paper from Tray 1 Windows PCL/PS/XPS drivers: Cover Mode tab Macintosh OS X driver: Per Page Setting Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3) 4-13...
Page 174: Adding Text And Images When Printing
To use the "Copy Guard" and "Password Copy" functions, the optional security kit SC-507 is required. Windows PCL/PS/XPS drivers: Stamp/Composition tab Macintosh OS X driver: Stamp/Composition Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. 4-14 ineo+ 220/280/360 (Version 3)
Page 175: Date/Time And Page Number
Macintosh OS X driver: Stamp/Composition Reference In order to use headers/footers, the header/footer must first be registered with the machine. Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3) 4-15...
Page 176: Adjusting The Image Quality
The document can be printed with the image quality appropriate for the contents of the document. Document Photo Windows PCL/PS/XPS drivers: Quality tab Macintosh OS X driver: Quality Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. 4-16 ineo+ 220/280/360 (Version 3)
Page 177: Glossy Mode
The document can be printed with a glossy finish. Windows PCL/PS/XPS drivers: Quality tab Macintosh OS X driver: Quality Reference For details, refer to chapter 9 and chapter 10 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3) 4-17...
Page 178: Using Printer Fonts
When printer fonts are used, the printing time is reduced, but there may be a difference between the displayed document and the print result. "Font Settings" can be configured using the Windows PCL or PS driver. Reference For details, refer to chapter 9 of the [User’s Guide Print Operations]. 4-18 ineo+ 220/280/360 (Version 3)
Page 179: Configuring An Easy-To-Use Printer Driver
Using My Tab, you can change the settings of the frequently used functions on one screen. Windows PCL/PS/XPS drivers: My Tab Reference For details, refer to chapter 9 of the [User’s Guide Print Operations]. ineo+ 220/280/360 (Version 3) 4-19...
Page 180 Configuring an easy-to-use printer driver 4.10 4-20 ineo+ 220/280/360 (Version 3)
Page 181: Useful Fax Operations
Useful fax operations...
Page 183: Registering Frequently Used Fax Numbers
Destinations can be registered in the address book or as group destinations. Address book destinations By registering a frequently used destination in the address book, the destination can be recalled simply with the press of an address book button. Opening the destination registration screen ineo+ 220/280/360 (Version 3)
Page 184 Registering frequently used fax numbers Destination registration screen Registering a fax number ineo+ 220/280/360 (Version 3)
Page 185 Index: Select the index characters used for organizing the fax numbers. By selecting index characters appropriate for the registered name, the fax number can easily be found. • Icon: When i-Option LK-101 v2 is enabled on this machine, select an icon. ineo+ 220/280/360 (Version 3)
Page 186: Group Destinations
The destinations that can be registered as a group destination must be registered in the address book. In order to register a group destination, the individual destinations must first have been registered in the address book. In the Create One-Touch Destination screen, touch [Group]. ineo+ 220/280/360 (Version 3)
Page 187: Registering The Program Destination
Scanning settings, transmission settings and destination can be registered with a single button. These are called program destinations. The registered program destinations can easily recalled and used. Reference For details, refer to chapter 9 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3)
Page 188: Checking Fax Operations Performed Until Now
A log of the transmissions and receptions can be viewed in a report and printed. The transmission report, reception report and activity report, which combines the transmission and reception reports, are available in the Communication List screen. ineo+ 220/280/360 (Version 3)
Page 189 Fax Retransmit User Box can be sent manually. Settings must be specified in Administrator mode in order to automatically save jobs in the Fax Retransmit User Box. For details, refer to chapter 10 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3)
Page 190: Transmitting To Multiple Recipients At The Same Time
Recipients can be specified for broadcast transmissions by typing in the destination using the keypad or by selecting a registered destination. In addition, recipients can be specified using a combination of the two methods. Entering a destination with the keypad 5-10 ineo+ 220/280/360 (Version 3)
Page 191 A destination can also be entered from the control panel. A destination can also be specified by entering its registration number. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 5-11...
Page 192 Direct Input: 100 fax addresses, 5 E-Mail address, Internet fax address or IP address fax addresses, 5 SMB addresses, 5 FTP addresses, 5 user box addresses, 5 WebDAV addresses Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 5-12 ineo+ 220/280/360 (Version 3)
Page 193: Selecting Registered Transmission Source Information
Selecting registered transmission source information Selecting registered transmission source information Fax transmission source information settings Registered transmission source information (transmission source name and fax ID) can be selected and changed. From : User01 From : Group03 ineo+ 220/280/360 (Version 3) 5-13...
Page 194 The administrator can set the position for printing the transmission source information on the outside or inside of the document or it can be set to not be printed. Reference For details, refer to chapter 10 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 5-14 ineo+ 220/280/360 (Version 3)
Page 195: Scanning The Documents To Be Sent
Document Name This parameter is not available when sending to a fax number. Separate Scan Select this setting to send altogether a document scanned in separate batches. ineo+ 220/280/360 (Version 3) 5-15...
Page 196 In order to use the TX Stamp function, optional stamp unit must be installed. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 5-16 ineo+ 220/280/360 (Version 3)
Page 197: Sending Documents With A Command From The Recipient
A document sent using this machine’s "Polling TX" function is stored in this machine’s Polling Transmission User Box and is sent when a request is received from the recipient. Sender Receiver Request for data to be sent Polling Transmission User Box ineo+ 220/280/360 (Version 3) 5-17...
Page 198 To request that a machine sends data saved with a polling transmission, press [Polling RX] in the Communication Method Settings screen, and then specify the sender in order to receive the data. Bulletin polling transmission can be used if the recipient’s fax machine supports F-code functions. 5-18 ineo+ 220/280/360 (Version 3)
Page 199: Reducing Communication Costs
Reference In order to send the fax late at night, timer transmission must be specified when the document is sent. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 5-19...
Page 200: Reducing Communication Costs (Using The Internet/Intranet)
Before IP address faxing can be used, various settings must be specified by the administrator. IP address faxing is available only between the compatible models of Develop or between models compatible with the direct SMTP standard recommended by CIAJ (Communications and Information network Association of Japan).
Page 201: Sending Documents By E-Mail
Sending documents by e-mail Sending documents by e-mail Internet faxing Using the Internet, a scanned document can be sent as an e-mail attachment. The transmission costs are included in the Internet charges. When the destination is registered ineo+ 220/280/360 (Version 3) 5-21...
Page 202 Sending documents by e-mail When the destination is entered directly Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 5-22 ineo+ 220/280/360 (Version 3)
Page 203: Reducing Printing Costs
Received faxes can be saved in user box as data and printed when they are needed. Printing only the necessary fax documents among all the received fax documents enhances security and reduces printing costs. Receive Compulsory Memory RX User Box Printing data in the Compulsory Memory RX User Box ineo+ 220/280/360 (Version 3) 5-23...
Page 204 Settings for the Compulsory Memory RX User Box are specified in Administrator mode. The administrator password is required to specify the settings. Reference For details, refer to chapter 7 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 5-24 ineo+ 220/280/360 (Version 3)
Page 205: Sending Confidential Documents
(transmission ID) can be specified in addition to the fax number of the destination to preserve the confidentiality of the document. SUB address 1 2 3 4 Transmission ID * * * * Receive Confidential User Box ineo+ 220/280/360 (Version 3) 5-25...
Page 206 In order perform an F-code transmission, a confidential box and transmission ID must be specified on the recipient’s fax machine. An F-code transmission can be used only if the recipient’s fax machine supports F-code functions. 5-26 ineo+ 220/280/360 (Version 3)
Page 207: Forwarding Received Data
If fax forwarding is specified, Memory RX Setting, PC-FAX RX setting and TSI User Box Setting cannot be used. Reference For details, refer to chapter 10 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 5-27...
Page 208: Faxing Data Directly From A Computer
In order to use computer faxing, the fax driver must be installed. The fax document settings can be specified. A destination can be selected from the address book. Reference For details, refer to chapter 4 of the [User’s Guide Fax Driver Operations]. 5-28 ineo+ 220/280/360 (Version 3)
Page 209: Useful Network Scan Operations
Useful network scan operations...
Page 211: Registering Frequently Used Destinations
Destinations can be registered in the address book or as group destinations. Address book destinations By registering a frequently used destination in the address book, the destination can be recalled simply with the press of an address book button. Opening the destination registration screen ineo+ 220/280/360 (Version 3)
Page 212 Registering frequently used destinations Destination registration screen Registering an e-mail address ineo+ 220/280/360 (Version 3)
Page 213 Index: Select the index characters used for organizing the e-mail addresses. By selecting index char- acters appropriate for the registered name, the e-mail address can easily be found. • Icon: When i-Option LK-101 v2 is enabled on this machine, select an icon. ineo+ 220/280/360 (Version 3)
Page 214: Group Destinations
The destinations that can be registered as a group destination must be registered in the address book. In order to register a group destination, the individual destinations must first have been registered in the address book. In the Create One-Touch Destination screen, touch [Group]. ineo+ 220/280/360 (Version 3)
Page 215: Registering The Program Destination
Scanning settings, transmission settings and destination can be registered with a single button. These are called program destinations. The registered program destinations can easily recalled and used. Reference For details, refer to chapter 9 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3)
Page 216: Transmitting Fine Text And Clean Images
A document of good quality can be sent by using a combination of these settings. Adjusting the resolution When transmitting fine text and images, an image of better quality can be sent by specifying a higher resolution. ineo+ 220/280/360 (Version 3)
Page 217: Selecting An Original Type Setting
The higher the resolution, the larger the data becomes. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. Selecting an Original Type setting Select the appropriate scanning method for the text and image type of the document. ineo+ 220/280/360 (Version 3)
Page 218 Select this setting for documents consisting only of photos. Dot Matrix Original Select this setting for documents consisting of text that gener- ally appears faint. Copied Paper Select this setting for documents with an even density pro- duced using a copier or printer. 6-10 ineo+ 220/280/360 (Version 3)
Page 219 Transmitting fine text and clean images If "Text/Photo" or "Photo" is selected, the photo type can be selected. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-11...
Page 220: Transmitting With The Selected Color And File Type Settings
Transmitting with the selected Color and File Type settings Transmitting with the selected Color and File Type settings Selecting the Color and File Type settings File Type 6-12 ineo+ 220/280/360 (Version 3)
Page 221: Selecting File Type And Color Settings
The Color settings are available when saving scan documents in user boxes, when sending data by e-mail or when transmitting data on a network. The Color settings are not available when faxing. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-13...
Page 222: Transmitting With The Page Number Or Time Added
The page number or date/time can be added to the scanned document. Both the page number and the date/time can be added at the same time. Page number The page number can be added to a document to be sent. 6-14 ineo+ 220/280/360 (Version 3)
Page 223 If [Text Details] is pressed, you can specify the text color, text size, or text type. Page numbers can also be added with header/footer settings. The header/footer settings are specified in Administrator mode. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-15...
Page 224: Adding The Date And Time
Transmitting with the page number or time added Adding the date and time The date and time of scanning can be added to a document to be sent. 6-16 ineo+ 220/280/360 (Version 3)
Page 225 If [Text Details] is pressed, you can specify the text color, text size, or text type. The data/time can also be added with header/footer settings. The header/footer settings are specified in Administrator mode. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-17...
Page 226: Transmitting With The Background Color Adjusted
When the print on the back side may be reproduced on the front side of the copy or when the original background is colored, you can adjust the background density to output clear scan data. 6-18 ineo+ 220/280/360 (Version 3)
Page 227 Transmitting with the background color adjusted Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-19...
Page 228: Transmitting With Shadows Erased
Transmitting with shadows erased Transmitting with shadows erased Frame Erase Scans can be sent while erasing unwanted areas around the document, such as the transmission information on received faxes and the shadows of punched holes. 6-20 ineo+ 220/280/360 (Version 3)
Page 229 The width of the frame to be erased can be set between 1/16 inch and 2 inches (0.1 and 50.0 mm). Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-21...
Page 230: Transmitting To Multiple Recipients
Transmitting to multiple recipients Transmitting to multiple recipients Searching for a registered destination Select a recipient registered in the address book. 6-22 ineo+ 220/280/360 (Version 3)
Page 231 Reference Unwanted destinations can be deleted from under "Broadcast Destinations", or the settings can be changed. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. ineo+ 220/280/360 (Version 3) 6-23...
Page 232: E-Mail Transmissions
Scan data can be sent as an e-mail attachment simply by specifying the e-mail address. Internet Select a registered destination, or directly type in the e-mail address. Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 6-24 ineo+ 220/280/360 (Version 3)
Page 233: Changing The E-Mail Subject Or Name Of The Attached File
The subject of the e-mail message and the file name can be changed when sending scan data by e-mail. • Document Name: The name of the attached file can be changed. • Subject: The subject of the e-mail message can be changed. • Body: E-Mail text can be entered. ineo+ 220/280/360 (Version 3) 6-25...
Page 234 Sending documents by e-mail Reference For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 6-26 ineo+ 220/280/360 (Version 3)
Page 235: Checking Transmissions Performed Until Now
Current Jobs/Job History lists The transmission log includes the Current Jobs list, which allows the jobs currently being performed to be checked, and the Job History list, which allows completed transmission jobs to be checked. ineo+ 220/280/360 (Version 3) 6-27...
Page 236 Jobs that are being sent and jobs queued to be sent are displayed in the Current Jobs list. Jobs that have been sent are displayed in the Job History list. Reference For details, refer to chapter 3 of the [User’s Guide Network Scan/Fax/Network Fax Operations]. 6-28 ineo+ 220/280/360 (Version 3)
Page 237 Useful box operations...
Page 239: Changing The Name Of A Saved Document
Changing the name of a saved document Edit Name The name of a document saved in a user box can be changed. Documents that were not named when they were saved can be given a name that will be easier to remember. ineo+ 220/280/360 (Version 3)
Page 240 Reference The document name is the name of the file sent. Change the document name after considering the conditions of the destination server. Reference For details, refer to chapter 7 of the [User’s Guide Box Operations]. ineo+ 220/280/360 (Version 3)
Page 241: Scanning Double-Sided Documents
Scanning double-sided documents Scan Settings When saving data in a user box from User Box mode, press [Scan Settings] to change the settings for scanning the document. To scan double-sided documents, select "2-Sided" in the Scan Settings screen. ineo+ 220/280/360 (Version 3)
Page 242 Scan Settings screen, be sure to press [Original Direction] and [Binding Position] in the Original Settings screen, and select the appropriate settings for the loaded document. Reference For details, refer to chapter 6 of the [User’s Guide Box Operations]. ineo+ 220/280/360 (Version 3)
Page 243: Automatically Erasing Data From User Boxes
Specify a setting for "Auto Document Delete Time" when registering a user box. Reference To change the Auto Document Delete Time setting for a user box that has already been registered, press [Edit] for the user box. ineo+ 220/280/360 (Version 3)
Page 244 Automatically erasing data from user boxes ineo+ 220/280/360 (Version 3)
Page 245 Automatically erasing data from user boxes Reference For details, refer to chapter 8 of the [User’s Guide Box Operations]. ineo+ 220/280/360 (Version 3)
Page 246: Printing/Sending Multiple Data Combined
Printing/sending multiple data combined Printing/sending multiple data combined Combine/Bind TX Two or more data saved in user boxes can be printed or sent. When "Combine" is selected 7-10 ineo+ 220/280/360 (Version 3)
Page 247 Printing/sending multiple data combined Specify the order that the data is combined. Specify the Finishing settings, and then print the data. When "Bind TX" is selected ineo+ 220/280/360 (Version 3) 7-11...
Page 248 Printing/sending multiple data combined Specify the order that the data is combined. Select the destination, and then send the data. 7-12 ineo+ 220/280/360 (Version 3)
Page 249 You cannot send the data saved in a user box to a non-scanning destination (G3 fax, Internet fax, or IP address fax). Reference For details, refer to chapter 7 of the [User’s Guide Box Operations]. ineo+ 220/280/360 (Version 3) 7-13...
Page 250: Changing Finishing Settings For Saved Data Before Printing
Changing finishing settings for saved data before printing Changing finishing settings for saved data before printing Finishing Before printing data saved in a user box, the finishing settings can be changed. 7-14 ineo+ 220/280/360 (Version 3)
Page 251 Select this setting to staple copies at two locations along the center, then fold the copies in half before feeding them out. Reference For details, refer to chapter 7 of the [User’s Guide Box Operations]. ineo+ 220/280/360 (Version 3) 7-15...
Page 252: Performing Box Operations From A Computer
Check a job. Perform operations with data in user boxes. Direct printing Register/edit destinations. MFP environment, security, authentication, network, printer, and fax settings Reference For details, refer to chapter 9 of the [User’s Guide Box Operations]. 7-16 ineo+ 220/280/360 (Version 3)
Page 253: Advanced Functions
Advanced functions...
Page 255: Registering I-Option Lk-101 V2/Lk-102/Lk-105
To use the advanced function, an optional upgrade kit UK-203 is required. For details on purchasing the optional equipment, contact your service representative. To use i-Option LK-101 v2, LK-102 or LK-105 function in the MFP, register i-Option LK-101 v2, LK-102 or LK-105 in the MFP to enable the function. ineo+ 220/280/360 (Version 3)
Page 256 Reference For details on My Panel Manager, refer to the My Panel Manager manual. For the MFP panel operations when the MFP is connected to My Panel Manager, refer to the [User's Guide Advanced Function Operations]. ineo+ 220/280/360 (Version 3)
Page 257: Procedure To Enable I-Option Lk-101 V2/Lk-102/Lk-105 Functions
Token Number Number of Devices Allowed The Web site URL of the License Management Server (LMS) % For details on purchasing i-Option LK-101 v2/LK-102/LK-105, contact your service representative. Issuing a request code. % Press the [Utility/Counter] key. ineo+ 220/280/360 (Version 3)
Page 258 To register i-Option LK-101 v2/LK-102/LK-105 % Press [Administrator Settings]. % Type in the administrator password, and then press [OK]. % Press [License Settings]. ineo+ 220/280/360 (Version 3)
Page 259 To register i-Option LK-101 v2/LK-102/LK-105 % Press [Get Request Code]. % Press [Yes], and then press [OK]. % Press [Print] to print the request code. ineo+ 220/280/360 (Version 3)
Page 260 % Access the Web site of the License Management Server (LMS). % Select a language. % Type in the serial number and request code displayed by issuing a request code, and then click the [Next] button. ineo+ 220/280/360 (Version 3)
Page 261 To register i-Option LK-101 v2/LK-102/LK-105 % Type in the token number included in the token certificate, select registration options, and then click the [Next] button. % Confirm the registration contents, and the click the [Generate License Code] button. ineo+ 220/280/360 (Version 3)
Page 262 % The license code and function code are issued. The license code and function code are required to enable the i-Option LK-101 v2/LK-102/LK-105 functions. Enabling the i-Option LK-101 v2/LK-102/LK-105 functions. % On the License Settings screen of the Administrator Settings, press [Install License]. 8-10 ineo+ 220/280/360 (Version 3)
Page 263 To register i-Option LK-101 v2/LK-102/LK-105 % Press [Function Code] to enter the obtained function code. % Press [License Code] , and then type in the license code issued. % Press [Install]. % Press [Yes], and then press [OK]. ineo+ 220/280/360 (Version 3) 8-11...
Page 264 After enabling the function, turn off the main power switch, and then wait about 10 seconds before turning it on again. Otherwise, the machine may not operate correctly. On the License Settings screen of the Administrator Settings, press [List of Enabled Functions] to check the list of enabled functions. 8-12 ineo+ 220/280/360 (Version 3)
Page 265 Troubleshooting...
Page 267: Troubleshooting
Why does no screen appear in the touch panel? If no operation is performed for a specified length of time, the touch panel goes off and the machine automatically enters a mode where it conserves energy. ineo+ 220/280/360 (Version 3)
Page 268 Check that the machine has been turned on by using both the sub power switch and the main power switch. NOTICE If no screen appears in the touch panel after the indicated items have been checked, contact your service representative. ineo+ 220/280/360 (Version 3)
Page 269: Why Does A Message Such As Consumable Replacement Or Cleaning Maintenance Appear?
If the message remains displayed after the replacement or cleaning has been performed, contact your service representative. Why does the jam message remain displayed? A jam may have occurred in a location other than that indicated in the screen. Check the location indicated in the displayed screen. ineo+ 220/280/360 (Version 3)
Page 270: What Is Image Stabilization?
When image stabilization is finished, wait until printing automatically continues. NOTICE If the image stabilization operation does not end after waiting for some time, contact your service representative. ineo+ 220/280/360 (Version 3)
Page 271: Why Did An Error Message Appear?
Clear the error by following the on-screen instructions. NOTICE If the message remains displayed, note the trouble code that appeared in the screen, unplug the machine from the electrical outlet, and then contact the service representative. ineo+ 220/280/360 (Version 3)
Page 272 Troubleshooting ineo+ 220/280/360 (Version 3)
Page 273 User Settings parameters...
Page 275: Displaying The User Settings Screen
Various settings can be specified from the User Settings screen. Reference To change the default settings for Fax/Scan mode, press the [Fax/Scan] key, and then press the [Utility/Counter] key. Reference For details, refer to chapter 6 of the [User’s Guide Copy Operations]. ineo+ 220/280/360 (Version 3) 10-3...
Page 276: Settings That Can Be Specified
For details on the Printer Settings parameters, refer to chapter 13 of the [User’s Guide Print Operations]. System Settings The display language of the touch panel, the measurement units and settings for the power-saving modes can be changed. 10-4 ineo+ 220/280/360 (Version 3)
Page 277: Custom Display Settings
The display in the left panel of the touch panel screen and the settings in the Basic screen can be changed. Copier Settings The settings for copy functions can be changed so that the operations can easily be performed. ineo+ 220/280/360 (Version 3) 10-5...
Page 278: Scan/Fax Settings
Scan/Fax Settings The settings for fax/scan functions can be changed so that the operations can easily be performed. Printer Settings The settings for print functions can be changed so that the operations can easily be performed. 10-6 ineo+ 220/280/360 (Version 3)
Page 279 Appendix...
Page 281: Glossary
This Finishing function feeds copies out by set when two or more copies are print- ed of a multi-page document. Staple This Finishing function feeds copies out bound with staples when copying docu- ments containing two or more pages. ineo+ 220/280/360 (Version 3) 11-3...
Page 282 This feature sets the machine to Sleep mode at the specified time. The day and time periods when the machine is not used can be specified so the machine can automatically switch to a mode where it conserves energy. 11-4 ineo+ 220/280/360 (Version 3)
Page 283: Trademarks And Copyrights
PowerPC is a trademark of IBM Corporation in the United States, or other countries, or both. In regard to the Citrix Technology Member Develop GmbH is a Citrix Technology Member The Citrix Technology Member is a program that, in combination with a solution of Citrix, promotes and develops solutions in order to be an industry leader in providing customers with better solutions.
Page 284: Openssl Statement
Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. 11-6 ineo+ 220/280/360 (Version 3)
Page 285: Netsnmp License
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ineo+ 220/280/360 (Version 3) 11-7...
Page 286 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 11-8 ineo+ 220/280/360 (Version 3)
Page 287: Kerberos
Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting. ineo+ 220/280/360 (Version 3) 11-9...
Page 288 * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 11-10 ineo+ 220/280/360 (Version 3)
Page 289: Wpa Supplicant
Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. ineo+ 220/280/360 (Version 3) 11-11...
Page 290: Mersenne Twister
User's Guide may not be reproduced in part or in full without permission. Develop GmbH will not be held liable for any incidents caused by using this printing system or User's Guide. Information included in User's Guide is subject to change without notice.
Page 291: Software License Agreement
C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein. You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries. ineo+ 220/280/360 (Version 3) 11-13...
Page 292: About Adobe Color Profile
TRADEMARKS Adobe and the Adobe logo are the registered trademarks or trademarks of Adobe in the United States and other countries. With the exception of referential use, you will not use such trademarks or any other Adobe trademark or logo without separate prior written permission granted by Adobe. 11-14 ineo+ 220/280/360 (Version 3)
Page 293 Adobe and you with respect to the licensing to you of the Software. No variation of the terms of this Agreement will be enforceable against Adobe unless Adobe gives its express consent, in writing, signed by an authorized signatory of Adobe. ineo+ 220/280/360 (Version 3) 11-15...
Page 294: Icc Profile For Toyo Ink Standard Color On Coated Paper (Toyo Offset Coated)
This ICC Profile was made by TOYO INK using X-Rite ProfileMaker and a license to distribute the profile has been granted by X-Rite, Incorporated. TOYO Offset Coated 3.0 © TOYO INK MFG. CO., LTD. 2010 11-16 ineo+ 220/280/360 (Version 3)
Page 295: Dic Standard Color Profile License Agreement
Profile for such usage. d. You shall not use the Profile to develop any software or other technology having the same primary function as the Profile, including but not limited to using the Profile in any development or test procedure that seeks to develop like software or other technology, or to determine if such software or other technology performs in a similar manner as the Profile.
Page 296 The failure or delay of DIC to exercise any of its rights under this License Agreement or upon any breach of this License Agreement shall not be deemed a waiver of those rights or of the breach. 11-18 ineo+ 220/280/360 (Version 3)
Page 297: I-Option Lk-105 (Searchable Pdfs) End User License Agreement
This license shall automatically terminate upon a failure on your part to comply with any term or condition of this Agreement, in which case you agree to immediately stop use of the Program. This Agreement shall be governed by the laws of Japan. ineo+ 220/280/360 (Version 3) 11-19...
Page 298 LK-105 (Searchable PDFs) End User License Agreement 11.7 11-20 ineo+ 220/280/360 (Version 3)
Page 299 Index...
Page 301 Cover sheet 3-20 4-19 My tab 6-27 Current jobs list Offset 4-15 6-14 Date/time 1-16 Operating environment Deleting document 1-62 Options Double-sided copy Original type Double-sided documents Overlay 4-14 Double-sided print Page number 4-15 6-14 ineo+ 220/280/360 (Version 3) 12-3...
Page 302 Select color 4-16 2-10 2-14 Selecting destinations Separate scan 3-29 Shortcut key 3-38 Sleep mode 1-15 Space requirements 3-22 Staple 5-19 Timer transmission Token certificate 11-5 Trademarks and copyright Transparency interleave 4-12 Troubleshooting Turning on/off 1-34 12-4 ineo+ 220/280/360 (Version 3)

This manual is also suitable for:

Ineo+360 Ineo+280 Ineo+ 360 Ineo+ 280

Develop ineo+ 220 Quick Manual

1 Introduction

2 Basic Operations

3 Useful Copy Operations

4 Useful Printing Operations

5 Useful Fax Operations

6 Useful Network Scan Operations

9 Troubleshooting

10 User Settings Parameters

About Adobe Color Profile

ICC Profile for Toyo Ink Standard Color on Coated Paper (Toyo Offset Coated)

DIC Standard Color Profile License Agreement

I-Option LK-105 (Searchable Pdfs) End User License Agreement

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Develop ineo+ 220

Summary of Contents for Develop ineo+ 220