Develop ineo+ 6500 Service Manual page 56

Theory of Operation Ver1.0 Sep.2006
(2) The reading operation when the start button is turned on
• After finishing the movement for the shading correction, the exposure unit shifts to scanning operation auto-
matically.
• The other movements of the exposure unit are the same as when the SW2 is turned on.
C. Original reading mode
• There are two original reading modes; platen mode and DF mode.
• Whether the density setting is set to manual or AE, the two modes differ in movement of the exposure unit.
(1) When selecting the manual density setting
[1] [2]
[4]
[5]
[6]
[7]
[1] Home position
[2] Scanner home sensor (PS1)
[3] Platen APS position
[4] White correction (First time)
[3]
[5] White correction (Second time)
[6] Exposure scan
[7] Home position search
7. SCANNER SECTION
a03ut2c018ca
25