Develop ineo+ 6500 Service Manual page 459

6. STACKER SECTION
B. Stopper control
(1) Folding mode
Transmitting the FNS signal from the main body [1], the saddle stitching stopper motor (M18) rotates [2] to move
down the saddle stitching stopper to the stopping position in accordance with the paper size.
After completing the alignment operation of the last paper [3], M18 rotates [4] to move down the saddle stitching
stopper to the folding position.
After completing the folding operation, when the folding paper exit sensor (PS25) detects the trailing edge of the
paper bundle, M18 rotates [5] to move up the saddle stitching stopper to the alignment position in accordance
with the paper size and stand by for the paper of the subsequent copy.
Alignment motor /Up (M5)
Alignment motor /Lw (M16)
Saddle stitching stopper home sensor (PS23)
Saddle stitching
stopper motor (M18)
Folding paper exit sensor (PS25)
[1] FNS start signal turned ON
[2] Moving to the alignment position for the
paper size
[3] Last paper of the copy aligned
34
UP
DOWN
[1] [2]
Theory of Operation Ver1.0 Sep.2006
[3]
[4]
[4] Moving to the folding position for the paper size
[5] Moving to the alignment position for the
subsequent copy
[5]
15jmt2c005na