LIGHTS/METERS/SWITCHES
CLUTCH SWITCH
Disconnect the clutch switch wire connectors and
check for continuity between the switch terminals.
There should be continuity with the clutch lever
squeezed and no continuity with the lever released.
NEUTRAL SWITCH
INSPECTION
Remove the under cowl (page 2-13).
Disconnect the neutral switch connector.
Check for continuity between the switch terminal
and engine ground.
There should be continuity when the transmission
is in neutral, and no continuity when the transmis-
sion is in gear except neutral.
REMOVAL/INSTALLATION
Remove the under cowl (page 2-13).
Disconnect the neutral switch connector.
Remove the neutral switch with the sealing washer
from the crankcase.
20-24
CLUTCH SWITCH
NEUTRAL SWITCH
NEUTRAL SWITCH
CONNECTOR
CONNECTOR
NEUTRAL SWITCH