Honda Transalp XL700V Manual page 224

REPLACEMENT/AIR BLEEDING
When filling the system or reserve tank with cool-
ant, or checking the coolant level, hold the motorcy-
cle in an upright position.
Remove the following:
– Right front side cowl (page 2-9)
– Under cowl (page 2-13)
Remove the radiator cap.
Drain the coolant from the system by removing the
drain bolt and sealing washer.
Reinstall the drain bolt with a new sealing washer
and tighten it to the specified torque.
TORQUE: 13 N·m (1.3 kgf·m, 10 lbf·ft)
Disconnect the siphon hose from the reserve tank
and drain the coolant.
Empty the coolant by removing the reserve tank
(page 6-16).
Rinse the inside of the reserve tank with water.
Install the reserve tank (page 6-16).
Fill the system with the recommended coolant
through the filler opening up to the filler neck.
COOLING SYSTEM
RADIATOR CAP
DRAIN BOLT/SEALING WASHER
SIPHON HOSE RESERVE TANK
FILLER NECK
6-7