Nuts, Bolts, Fasteners; Wheels/Tires - Honda Transalp XL700V Manual

REAR SUSPENSION ADJUSTMENT
COMPRESSION DAMPING ADJUSTER
Do not turn the adjuster more than the given posi-
tions or the adjuster may be damaged.
• Damping adjustment is referenced from the full
hard position.
The compression damping can be adjusted by turn-
ing the adjuster.
TURN CLOCKWISE:
Increase the damping force
TURN COUNTERCLOCKWISE:
Decrease the damping force
Turn the compression adjuster clockwise until it
stops (full hard position), then turn the adjuster
counterclockwise.
COMPRESSION ADJUSTER STANDARD POSITION:
2 turns out from full in

NUTS, BOLTS, FASTENERS

Check that all chassis nuts and bolts are tightened to
their correct torque values (page 1-13).
Check that all cotter pins, safety clips, hose clamps
and cable stays are in place and properly secured.

WHEELS/TIRES

Support the motorcycle securely and raise the front
wheel off the ground.
Hold the front fork leg and move the front wheel
sideways forcefully to see if the wheel bearings are
worn.
For front wheel service (page 13-15).
Support the motorcycle securely and raise the rear
wheel off the ground.
Hold the swingarm and move the rear wheel side-
ways with the force to see if the wheel bearings are
worn.
For rear wheel service (page 14-6).
MAINTENANCE
ADJUSTER
3-29