Honda Transalp XL700V Manual page 585

IMMOBILIZER SYSTEM (HISS)
REPLACEMENT
Remove the ignition switch (page 20-20).
Remove the screws and the immobilizer receiver.
Install a new receiver and tighten the screws
securely.
Route the receiver wire properly (page 1-21).
Install the ignition switch (page 20-20).
REPLACEMENT PARTS FOR PROBLEM
One Key has been lost, or
additional spare key is
required.
All key have been lost, or
ECM is faulty.
Immobilizer receiver is faulty.
Ignition switch is faulty.
*Accessory lock is faulty.
*Accessory lock means the fuel fill cap, seat lock or handle lock.
21-16
Problem
Transponder
Key
IMMOBILIZER
RECEIVER
Replacement parts
Immobilizer
ECM
receiver
SCREWS
Ignition *Accessory
switch lock and key