Honda Transalp XL700V Manual page 176

MIL 11 BLINKS (VS SENSOR)
• Before starting the troubleshooting, check the
following.
– Speedometer/VS sensor (XL700V: 20-11)
– ABS indicator problem code (XL700VA: 16-10)
• Before starting the inspection, check for loose or
poor contact on the VS sensor 2P (Orange) con-
nector, combination meter 20P connector, ABS
modulator 26P connector (XL700VA) and ECM
33P connectors, then recheck the MIL blinking.
1. ECM Signal Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the combination meter 20P connec-
tor.
Check for continuity between the combination
meter 20P connector of the wire harness side
and ground.
Connection: Pink/green – ground
Is there continuity?
YES – Short circuit in Pink/green wire
NO – GO TO STEP 2.
FUEL SYSTEM (PGM-FI)
XL700V:
COMBINATION METER 20P CONNECTOR
(Wire side/female terminal)
XL700VA:
P/G
COMBINATION METER 20P CONNECTOR
(Wire side/female terminal)
P/G
5-45