CRANKCASE SEPARATION
Remove the engine from the frame (page 7-4).
For Service Information for removal of necessary
parts before separating the crankcase (page 12-3).
Remove the bolts and cam chain tensioner setting
plates.
Remove the cam chains.
Remove the bolts and oil seal setting plate.
Remove the bolts and bearing setting plate.
Loosen the 6 mm and 8 mm bolts in a crisscross
pattern in several steps, then remove them.
CRANKCASE/CRANKSHAFT/TRANSMISSION
LEFT:
CHAIN
SETTING PLATE
BOLTS
SETTING PLATE
RIGHT:
BOLT
CHAIN
SETTING PLATE
BOLT
SETTING PLATE
BOLTS
8 mm BOLTS
6 mm BOLTS
12-7