Engine Installation - Honda Transalp XL700V Manual

ENGINE REMOVAL/INSTALLATION
Remove the engine hanger nut, bolt and collar.
Remove the swingarm pivot nut and bolt.
Move the swingarm backward and the engine to
During engine
right.
removal, hold the
Slide out the drive chain from the gearshift spindle
engine securely and
and countershaft.
be careful not to
Carefully maneuver the engine and removed it out
damage the frame
of the frame to the right.
and engine.

ENGINE INSTALLATION

• All the engine mounting bolts, engine hanger
plates and nuts loosely install with the horn stay
and under cowl mounting plate, then tighten the
bolts and nuts to the specified torque.
• Route the wires, hoses and cables properly (page
1-21).
Using a floor jack or other adjustable support, care-
During engine
fully place the engine into the frame and maneuver
installation, hold the
it into place.
engine securely and
be careful not to
damage the frame
and engine.
7-8
COLLAR
SWINGARM
BOLT/NUT
PIVOT NUT/BOLT