CYLINDER HEAD/VALVES
Align the bolt holes in the radiator and stay.
Front cylinder head
only:
Install and tighten the radiator lower mounting bolts
securely.
Install the following:
– CMP sensor (page 5-73)
– Camshaft (page 8-28)
– Cylinder head cover (page 8-33)
Fill and bleed the cooling system (page 6-7).
CAMSHAFT INSTALLATION
CAMSHAFT HOLDER ASSEMBLY
CAMSHAFT HOLDER
VALVE ADJUSTING SCREW
LOCK NUT
Apply engine oil to the valve adjusting screw lock
If disassembled the
nut threads and seating surface.
valve adjusting lock
nut and adjusting
Install the valve adjusting screw and lock nut.
screw.
8-28
EXHAUST ROCKER ARM
INTAKE ROCKER ARM
BOLTS
EXHAUST ROCKER ARM SHAFT
INTAKE ROCKER ARM SHAFT
ADJUSTING SCREW
LOCK NUT