ALTERNATOR/STARTER CLUTCH
STATOR INSTALLATION
12 N·m (1.2 kgf·m, 9 lbf·ft)
STATOR
Install the stator to the left crankcase cover.
Clean and apply a locking agent to the bolt threads
(page 1-18).
Install and tighten the stator bolts to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the grommets into the groove in the left
crankcase cover.
Clean and apply a locking agent to the bolt threads
(page 1-18).
Install the wire holder to the left crankcase cover.
Install and tighten the bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
11-12
12 N·m (1.2 kgf·m, 9 lbf·ft)
WIRE HOLDER
LEFT CRANKCASE COVER
STATOR
BOLT
BOLTS
GROMMET
HOLDER