FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
REMOVAL/INSTALLATION
Unhook the seat lock using the ignition key.
Remove the seat backward.
Install the seat by inserting prongs to the frame and
slits properly.
SIDE COVER
REMOVAL/INSTALLATION
Remove the seat (page 2-4).
Be careful not to
damage the side
Remove the trim clip and bolts.
cover bosses.
Release the bosses on the side cover from the frame
grommets and rear fender C slit, then remove the
side cover.
Install the side cover by inserting its bosses into the
frame grommets and tighten the bolts securely.
Install the seat (page 2-4).
2-4
SLITS
PRONGS
PRONGS
CLIP
GROMMETS
BOLTS
BOSSES
SEAT
IGNITION KEY
SLIT
SIDE COVER