Table of Contents
Advertisement
SWITCHES/
LIGHTS
NEUTRAL SWITCH
Remove the left side cover and seat.
Disconnect the neutral switch wire connector.
Check the switch for continuity between the switch
terminal
(wire removed) and ground with the
transmission in neutral and with the transmission in
any gear.
Replace the neutral switch if necessary (page 8-51.
CLUTC! SWITCH
Check continuity of the clutch lever (safety) switch
with the clutch released and applied. Replace if
necessary.
HANDLEBAR SWITCHES
GROUND
NEUTRAL SWITCH WIRE
CLUTCH SWITCH
CLUTCH APPLIED:
CONTINUITY
HEADLIGHT
CLUTCH RELEASED:
NB CONTINUITY
HI-L0 S b J l 1 T C I - I
The handlebar cluster switches (lights, turn signals,
horn, etc.) must be replaced a s assemblies.
Remove the headlight.
Continuity tests for the components of the handle-
bar cluster switches follow:
Continuity should exist between the color coded
wires in each chart.
Dale of
Issue:
December,
1982
O
HONBA MOTOR CO., LTD.
Advertisement
Table of Contents
Troubleshooting
