Heat Guard Plate; Sidestand - Honda Transalp XL700V Manual

HEAT GUARD PLATE

REMOVAL/INSTALLATION
Remove the exhaust system (page 2-14).
Remove the bolts, terminal collar, heat guard plate
and collars.
Installation is in the reverse order of removal.

SIDESTAND

REMOVAL/INSTALLATION
Remove the sidestand switch (page 20-25).
Support the motorcycle in an upright position.
Unhook the return spring.
Remove the pivot nut, bolt and sidestand.
Installation is in the reverse order of removal.
At installation, apply grease to the pivot bolt sliding
surfaces.
TORQUE:
Sidestand pivot bolt
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
Sidestand pivot lock nut
29.4 N·m (3.0 kgf·m, 22 lbf·ft)
FRAME/BODY PANELS/EXHAUST SYSTEM
HEAT GUARD PLATE
TERMINAL
COLLAR
COLLARS
SIDESTAND
BOLTS
BOLT/NUT
RETURN SPRING
2-23