Honda Transalp XL700V Manual page 407

REAR WHEEL/SUSPENSION
DISASSEMBLY
If you replace the driven sprocket, loosen the driven
sprocket nuts before removing the driven flange
from the wheel hub.
Remove the dust seal.
Remove the driven flange assembly from the left
wheel hub.
If you replace the driven sprocket, remove the nuts,
washers, driven sprocket and bolts.
Remove the O-ring.
Remove the wheel rubber dampers.
14-8
NUTS
BOLTS/NUTS/WASHERS
O-RING
DUST SEAL
DRIVEN FLANGE
SPROCKET
RUBBER DAMPER