Honda Transalp XL700V Manual page 426

Apply specified grease to the dust seal lips (page 1-
Right side:
18).
Install new dust seals into the right side pivot.
Install the side collars to the right side pivot.
Install the drive chain guide, washers and bolts.
Install the drive chain slider, collar and screw.
Tighten the lower side screw to the specified torque.
TORQUE: 6 N·m (0.6 kgf·m, 4.4 lbf·ft)
INSTALLATION
Apply a thin coat grease to the pivot bolt surface.
Set the swingarm into the frame and hold it.
Install the pivot bolt.
REAR WHEEL/SUSPENSION
DUST SEALS
SIDE COLLAR
BOLTS/WASHERS
SCREW/COLLAR
PIVOT BOLT
CHAIN GUIDE
CHAIN SLIDER
SWINGARM
14-27