Honda Transalp XL700V Manual page 359

CRANKCASE/CRANKSHAFT/TRANSMISSION
Clean the left and right crankcase mating surfaces
thoroughly, being careful not to damage them.
Make sure the all parts are installed in the left crank-
case.
Apply liquid sealant (Three Bond 1207B or equiva-
lent) to the crankcase mating surfaces.
Install the dowel pins into the left crankcase.
Coat a new pipe seal with engine oil and install it to
the oil pipe.
Install an pipe seal with its tapered side facing
inside.
Install the right crankcase over the left crankcase.
12-30
PIPE SEAL
DOWEL PINS
RIGHT CRANKCASE
LEFT CRANKCASE