Honda Transalp XL700V Manual page 288

Measure the piston O.D. at a point 15 mm (0.59 in)
from the bottom and 90° to the piston pin hole.
SERVICE LIMIT: 80.91 mm (3.185 in)
Compare this measurement against the maximum
cylinder I.D. measurement and calculate the cylin-
der-to-piston clearance (page 9-8).
SERVICE LIMIT: 0.10 mm (0.004 in)
Measure the piston pin O.D. at three points.
SERVICE LIMIT: 17.98 mm (0.708 in)
Measure the piston pin bore I.D.
SERVICE LIMIT: 18.05 mm (0.711 in)
Calculate the piston-to-piston pin clearance.
SERVICE LIMIT: 0.04 mm (0.002 in)
CONNECTING ROD
Measure the connecting rod small end I.D.
SERVICE LIMIT: 18.047 mm (0.7105 in)
Calculate the connecting rod-to-piston pin clear-
ance.
SERVICE LIMIT: 0.06 mm (0.002 in)
CYLINDER/PISTON
90°
15 mm
(0.59 in)
9-7