Honda Transalp XL700V Manual page 546

Hide thumbs Also See for Transalp XL700V:
Table of Contents

Advertisement

6. VS Sensor Line Open Circuit Inspection (XL700V)
Disconnect the combination meter 20P connector.
Check for continuity of the Pink/white and Green/red wires between the combination meter 20P and
VS sensor 2P (Orange) connector terminals.
Is there continuity?
NO
– Open circuit in Pink/white and/or Green/red wires between the combination meter 20P and
VS sensor 2P (Orange) connector
YES
– GO TO STEP 7.
7. VS Sensor Line Short Circuit Inspection (XL700V)
Connect the combination meter 20P connector.
Check for continuity of the Pink/white wire between the VS sensor 2P (Orange) connector terminal
and ground.
Is there continuity?
YES
– Short circuit in wire between the combination meter and VS sensor
NO
– Faulty combination meter
8. Combination Meter Signal Voltage Inspection (XL700VA)
Turn the ignition switch ON.
Measure the voltage at the combination meter connector Pink/green terminal (+) and ground (–)
while turning the rear wheel by hand.
Is the voltage repeat 0 to 5 V?
NO
– GO TO STEP 9.
YES
– Faulty combination meter
9. Combination Meter Signal Line Open Circuit Inspection (XL700VA)
Turn the ignition switch OFF.
Disconnect the combination meter 20P and ABS modulator 26P connectors.
Check for continuity of the Pink/green wire between the terminals of the wire harness side combina-
tion meter 20P connector and ABS modulator 26P connector.
Is there continuity?
NO
– Open circuit in Pink/green wire
YES
– GO TO STEP 10.
10. VS Sensor Line Open Circuit Inspection (XL700VA)
Disconnect the VS sensor 2P (Orange) connector.
Check for continuity of the Pink/white and Green/red wires between the ABS modulator 26P connec-
tor and VS sensor 2P (Orange) connector.
Is there continuity?
NO
– Open circuit in Pink/white and/or Green/red wires between the ABS modulator and VS sen-
sor
YES
– GO TO STEP 11.
11. VS Sensor Line Short Circuit Inspection At The VS Sensor 2P (Orange) Sensor side (XL700VA)
Connect the ABS modulator 26P connector.
Check for continuity of the Pink/white wire between the VS sensor 2P (Orange) connector terminal
and ground.
Is there continuity?
YES
– Short circuit in Pink/white wire between the combination meter and VS sensor
NO
– • Faulty VS sensor
• Faulty ABS modulator
LIGHTS/METERS/SWITCHES
20-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Transalp xl700va

Table of Contents