Honda Transalp XL700V Manual page 186

Hide thumbs Also See for Transalp XL700V:

Table of Contents

QUICK CONNECT FITTING

INSTALLATION

• Always replace the retainer of the quick connect

fitting when the fuel feed hose is disconnected.

• If the rubber cap is damaged or cut, replace it

with a new ones.

• Do not bent or twist fuel feed hose.

• If any retainer needs replacing, use the same

manufacturer's retainer as the ones being

removed (The various manufactures feature dif-

ferent retainer specification).

1. Insert a new retainer into the connector aligning

the retainer locking pawls with the connector

2. Press the quick connect fitting onto the pipe until

both retainer pawls lock with a "CLICK".

If it is hard to connect, put a small amount of

engine oil on the pipe end.

3. Make sure the connection is secure and that the

locking pawls are firmly locked into place; check

visually and by pulling the connector.

4. Make sure the rubber cap is in place (between

the retainer tab and stopper on pipe).

FUEL SYSTEM (PGM-FI)

LOCKING PAWLS

Show Quick Links

Chapters

Table of Contents

Transalp xl700va