Ignition Timing - Honda Transalp XL700V Manual

IGNITION SYSTEM
IGNITION COIL
REMOVAL/INSTALLATION
Turn the ignition switch OFF.
FRONT IGNITION COIL
Remove the right air guard (page 2-10).
Disconnect the spark plug cap (page 3-8).
Disconnect the ignition coil primary wire connec-
tors.
Remove the bolts, collars, washers and front igni-
tion coil from the frame.
Install the front ignition coil in the reverse order of
Route the spark
removal.
plug wire properly
(page 1-21).
REAR IGNITION COIL
Remove the heat guard plate (page 2-23).
Disconnect the spark plug cap (page 3-8).
Disconnect the ignition coil primary wire connec-
tors.
Remove the bolts, collars, washers and rear ignition
coil from the frame.
Install the rear ignition coil in the reverse order of
Route the spark
removal.
plug wires properly
(page 1-21).

IGNITION TIMING

Start the engine and warm it up to normal operating
temperature.
Stop the engine and remove the timing hole cap.
18-8
CONNECTORS FRONT IGNITION COIL
BOLTS/COLLARS/WASHERS
CONNECTORS REAR IGNITION COIL
COLLARS
WASHERS
TIMING HOLE CAP
BOLTS