Honda Transalp XL700V Manual page 314

CLUTCH/GEARSHIFT LINKAGE
Hook the spring end to the cover tab and lifter arm.
Hook
RETURN SPRING
Apply engine oil to the clutch lifter rod sliding sur-
LIFTER ROD
face.
Install the clutch lifter rod, aligning the rod end with
the groove in the clutch lifter arm by turning the
LIFTER ARM
clutch lifter arm clockwise.
INSTALLATION
Clean the mating surfaces of the right crankcase and
Be careful not to
cover.
damage the mating
surfaces.
Install the two dowel pins.
DOWEL PINS
Apply liquid sealant (Three Bond 1207B or equiva-
lent) to the right crankcase cover mating surface.
10-21