Brake Lever Adjustment; Brake Pedal Height Adjustment - Honda Transalp XL700V Manual

Firmly apply the brake lever or pedal, and check that
no air has entered the system.
If the lever or pedal feels soft or spongy when oper-
ated, bleed the air from the system.
For air bleeding procedures
– XL700V (page 15-7)
– XL700VA (page 15-11)
Inspect the brake hose and fittings for deterioration,
cracks, damage or signs of leakage.
Tighten any loose fittings.
Replace the hose and fittings as required.

BRAKE LEVER ADJUSTMENT

The distance between the top of the brake lever and
Align the allowance
the grip can be adjusted by turning the adjuster.
on the brake lever
with the index
number on the
adjuster.

BRAKE PEDAL HEIGHT ADJUSTMENT

Loosen the lock nut and turn the push rod as
required.
Tighten the lock nut to the specified torque.
TORQUE: 18 N·m (1.8 kgf·m, 1.3 lbf·ft)
BRAKE HOSE
ADJUSTER
PUSH ROD
MAINTENANCE
LOCK NUT
3-25