Honda Transalp XL700V Manual page 293

CYLINDER/PISTON
Slide the joint collar into the hole in the cylinder and
connect it.
Install the retaining clips into the joint collar
grooves.
Install a new O-ring to the hose joint groove.
Front cylinder only:
Install the hose joint to the front cylinder and
tighten the bolts securely.
Install the under cowl stay and bolts.
Front cylinder only:
Tighten the bolts securely.
Route the clutch cable and water hoses properly
(page 1-21).
Install the cylinder head (page 8-25).
9-12
CLIPS
JOINT COLLAR
HOSE JOINT
O-RING
UNDER COWL STAY
BOLTS
BOLTS