HYDRAULIC BRAKE
DISASSEMBLY
Disassemble the bracket from the caliper.
Remove the bracket pin boot and pad spring from
the caliper.
Remove the caliper pin boot and pad retainer from
the bracket
Clean the retainer and bracket mating surfaces.
Place a shop towel over the pistons.
Do not use high
Position the caliper body with the piston facing
pressure air or bring
down and apply small squirts of air pressure to the
the nozzle too close
fluid inlet to remove the pistons.
the inlet.
15-30
CALIPER
PAD RETAINER
BRACKET
BOOT
PAD SPRING
BOOT