Honda Transalp XL700V Manual page 122

SERVICE INFORMATION
GENERAL
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is
unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and
water as soon as possible after handling used oil.
• The crankcase must be separated to service the oil pump (page 4-5).
• When removing and installing the oil pump, use care not to allow dust or dirt to enter the engine.
• If any portion of the oil pump is worn beyond the specified service limits, replace the oil pump as an assembly.
• For engine oil level check (page 3-12).
• For engine oil and filter change (page 3-13).
• For oil pressure indicator inspection (page 20-18).
SPECIFICATIONS
Engine oil capacity
Recommended engine oil
Oil pressure at EOP switch
Oil pump rotor
TORQUE VALUE
Oil pump assembly bolt
ITEM
After draining
After draining/filter
change
After disassembly
Tip clearance
Body clearance
Side clearance
13 N·m (1.3 kgf·m, 10 lbf·ft)
STANDARD
2.1 liters (2.2 US qt, 1.8 Imp qt)
2.3 liters (2.4 US qt, 2.0 Imp qt)
2.9 liters (3.1 US qt, 2.6 Imp qt)
Honda "4-stroke motorcycle oil" or an
equivalent
Oil recommendation:
API classification SG or higher
(except oils labeled as energy conserv-
ing on the circular API service label)
Viscosity: SAE 10W-30
JASO T 903 standard: MA
2
294 kPa (3.0 kgf/cm , 43 psi)
-1
at 6,000 min (rpm)/(100°C/212°F)
0.15 (0.006)
0.15 – 0.21 (0.006 – 0.008)
0.02 – 0.08 (0.001 – 0.003)
CT bolt
LUBRICATION SYSTEM
Unit: mm (in)
SERVICE LIMIT
–
–
–
–
–
0.20 (0.008)
0.35 (0.014)
0.10 (0.004)
4-3