Brake Fluid Replacement/Air Bleeding (Xl700Va) - Honda Transalp XL700V Manual

BRAKE FLUID REPLACEMENT/AIR
BLEEDING (XL700VA)
• Do not allow foreign material to enter the system
when filling the reservoir.
• When using a commercially available brake
bleeder, follow the manufacturer's operating
instructions.
BRAKE FLUID DRAINING
LEVER BRAKE LINE
Turn the handlebar until the front master cylinder
reservoir is parallel to the ground, before removing
the reservoir cap.
Remove the screws and reservoir cap.
Remove the set plate and diaphragm.
Connect a commercially available brake bleeder to
Left side: Connect
the front brake caliper bleed valve.
the bleed hose to
Loosen the bleed valve and operate a air bleed tool.
the upper bleed
Drain the brake fluid.
valve.
PEDAL BRAKE LINE
Remove the seat (page 2-4).
Remove the screws and reservoir cap.
Remove the diaphragm plate and diaphragm.
HYDRAULIC BRAKE
RESERVOIR CAP/SET PLATE/DIAPHRAGM
SCREWS
BRAKE BLEEDER
RESERVOIR CAP/SET PLATE/DIAPHRAGM
BLEED VALVE
15-11