Honda Transalp XL700V Manual page 324

ALTERNATOR/STARTER CLUTCH
STARTER DRIVEN GEAR
Check the one-way clutch sprag contact surface,
teeth and sliding surface for wear or damage.
Measure the driven gear O.D.
SERVICE LIMIT: 57.73 mm (2.273 in)
Measure the driven gear I.D.
SERVICE LIMIT: 37.10 mm (1.461 in)
STARTER DRIVEN GEAR/STARTER
CLUTCH INSTALLATION
CLUTCH OUTER
FLYWHEEL
DRIVEN GEAR
ONE-WAY CLUTCH
30 N·m (3.1 kgf·m, 22 lbf·ft)
Clean and apply engine oil to the one-way clutch
ONE-WAY CLUTCH
sliding surface.
Install the one-way clutch into the clutch outer with
its flange side facing the flywheel.
CLUTCH OUTER
11-9