Honda Transalp XL700V Manual page 127

LUBRICATION SYSTEM
INSPECTION
Measure each clearance at several points and use
the largest reading to compare the service limit.
BODY CLEARANCE
Temporarily assemble the inner rotor, outer rotor,
drive pin and pump shaft into the pump body.
Measure the body clearance.
SERVICE LIMIT: 0.35 mm (0.014 in)
TIP CLEARANCE
Measure the tip clearance.
SERVICE LIMIT: 0.20 mm (0.008 in)
SIDE CLEARANCE
Measure the side clearance.
SERVICE LIMIT: 0.10 mm (0.004 in)
4-8
BODY CLERARANCE
TIP CLEARANCE
SIDE CLEARANCE