ENGINE REMOVAL/INSTALLATION
Install the pivot covers.
Install the drive sprocket with the drive chain onto
the countershaft.
Install the fixing plate onto the countershaft, align-
ing each tooth with the countershaft grooves.
Rotate the fixing plate and align the each bolt hole.
Install the drive sprocket bolts and tighten them to
the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Connect the water hoses and tighten the band
screws specified range (page 6-10).
7-10
PIVOT COVERS
SPROCKET
BOLTS
WATER HOSES
Align
FIXING PLATE
BAND SCREWS