Honda Transalp XL700V Manual page 493

ANTI-LOCK BRAKE SYSTEM (ABS)
PROBLEM CODE 51, 52 or 53 (Pump
Motor)
1. Motor Power Input Line Open Circuit Inspection
Disconnect the ABS modulator 26P connector.
Measure the voltage between the ABS modula-
tor 26P connector of the wire harness side and
ground.
There should be battery voltage at all times.
TOOL:
Test probe
Connection: Red (+) – Ground (–)
Is there battery voltage?
NO
YES
2. Motor Power Input Line Short Circuit Inspection
Check for continuity between the ABS modulator
26P connector of the wire harness side and
ground.
TOOL:
Test probe
Connection: Red – Ground
Is there continuity?
NO
YES
3. Failure Reproduction
Connect the ABS modulator 26P connector.
Erase the problem code (page 16-9).
Test ride the motorcycle above 5 km/h (3 mph).
Retrieve the problem code (page 16-8).
Does the indicator blink 51, 52, or 53 times?
YES
NO
16-18
07ZAJ-RDJA110
– GO TO STEP 2.
– GO TO STEP 3.
07ZAJ-RDJA110
– • Open circuit in Red wire and/or Red/
green wire
• Loose or poor contact on the connec-
tor
• Blown the "ABS MOTOR" fuse (30 A)
– Short circuit in Red and/or Red/green
wires
– Faulty ABS modulator
– Pump motor is normal (temporary fail-
ure).
ABS MODULATOR 26P CONNECTOR
(Wire side/female terminal)
ABS MODULATOR 26P CONNECTOR
(Wire side/female terminal)
ABS INDICATOR
R
R