Honda Transalp XL700V Manual page 290

CYLINDER STUD BOLT
REPLACEMENT
Thread two nuts onto the stud and tighten them
together, and use a wrench on them to turn the stud
bolt out.
Apply engine oil to the lower threads of a new stud
bolt and install it.
• Install the 10 mm stud bolt with its narrow differ-
ently size portion side facing the cylinder head
side.
• Install the 12 mm stud bolt with its small I.D. side
facing the cylinder head side.
Be sure to verify the stud height from the crankcase
surface.
Adjust the height if necessary.
CYLINDER/PISTON
10 mm STUD BOLTS
10 mm STUD BOLT:
10 mm STUD BOLT: 12 mm STUD BOLT:
12 mm STUD BOLT
9-9