REAR WHEEL/SUSPENSION
Remove the side collars and dust seals from the
Right side:
swingarm right side pivot.
Check the dust seals and side collars for damage or
fatigue.
Remove the pivot collar and dust seals from the
Left side:
swingarm left side pivot.
Check the dust seals and pivot collar for damage or
fatigue.
Turn the inner race of the right side pivot ball bear-
ing with your finger.
The bearing should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the swingarm pivot.
Remove and discard the bearing if the race does not
turn smoothly and quietly, or if it fits loosely in the
swingarm pivot.
PIVOT BEARING REPLACEMENT
RIGHT SIDE
Remove the snap ring from the swingarm right side
pivot.
14-24
DUST SEALS
SIDE COLLARS
DUST SEALS
PIVOT COLLAR
SNAP RING