Honda Transalp XL700V Manual page 544

SERVICE INFORMATION
GENERAL
Note the following when replacing the halogen headlight bulb.
– Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb, as they may create hot spots
on the bulb and cause it to fail.
– If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
• Be sure to install the dust cover after replacing the bulb.
• A halogen headlight bulb becomes very hot while the headlight is on, and remains hot for a while after it is turned off.
Be sure to let it cool down before servicing.
• Check the battery condition before performing any inspection that requires proper battery voltage.
• A continuity test can be made with the switches installed on the motorcycle.
• The following color codes used are indicated throughout this section.
Bu = Blue G = Green
Bl = Black Gr = Gray
Br = Brown Lb = Light blue
SPECIFICATIONS
Bulbs Headlight (High)
Headlight (Low)
Position light
Brake/taillight
License light
Front turn signal light
Rear turn signal light
Instrument light
Turn signal indicator
High beam indicator
Neutral indicator
Oil pressure indicator
MIL
HISS indicator
ABS indicator (XL700VA)
Fuse XL700V
XL700VA
TORQUE VALUES
Sidestand switch bolt
Neutral switch
EOP switch terminal screw
EOP switch
Front brake light switch screw
Turn signal lens screw
Headlight mounting bolt
Combination meter mounting screw
Lg = Light green
O = Orange
Y = Yellow
ITEM
Main fuse
Sub fuse
Main fuse
Sub fuse
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
1.9 N·m (0.2 kgf·m, 1.4 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
0.9 N·m (0.1 kgf·m, 0.7 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
LIGHTS/METERS/SWITCHES
R = Red
W = White
SPECIFICATIONS
12 V – 55 W
12 V – 55 W
12 V – 5 W
12 V – 21/5 W
12 V – 5 W
12 V – 21 W x 2
12 V – 21 W x 2
LED x 11
LED x 2
LED
LED
LED
LED
LED
LED
30 A
20 A x 3, 10 A x 5
30 A
30 A x 2, 20 A x 3, 10 A x 6
Apply sealant to the threads.
20-3