Torque Values - Honda Transalp XL700V Manual

TORQUE VALUES

STANDARD TORQUE VALUES
FASTENER TYPE
5 mm bolt and nut
6 mm bolt and nut
(Include SH flange bolt)
8 mm bolt and nut
10 mm bolt and nut
12 mm bolt and nut
ENGINE & FRAME TORQUE VALUES
• Torque specifications listed below are for important fasteners.
• Others should be tightened to standard torque values listed above.
FRAME/BODY PANELS/EXHAUST SYSTEM
ITEM
Exhaust pipe joint stud bolt
Muffler band bolt
Rear carrier bolt
Muffler mounting bolt
Exhaust chamber mounting bolt
Exhaust pipe joint nut
Sidestand pivot bolt
Sidestand pivot lock nut
Pillion step holder bolt
MAINTENANCE
ITEM
Spark plug
Timing hole cap
Crankshaft hole cap
Valve adjusting screw lock nut
Oil filter cartridge
Engine oil drain bolt
LUBRICATION SYSTEM
ITEM
Oil pump assembly bolt
N·m (kgf·m, lbf·ft)
5.2 (0.5, 3.8) 5 mm screw
10 (1.0, 7) 6 mm screw
6 mm flange bolt (8 mm head, small flange)
22 (2.2, 16) 6 mm flange bolt (8 mm head, large flange)
34 (3.5, 25) 6 mm flange bolt (10 mm head) and nut
55 (5.6, 41) 8 mm flange bolt and nut
10 mm flange bolt and nut
THREAD
Q'TY
DIA. (mm)
4
3
6
2
2
4
1
1
4
THREAD
Q'TY
DIA. (mm)
2
1
1
8
1
1
THREAD
Q'TY
DIA. (mm)
3
FASTENER TYPE
TORQUE
N·m (kgf·m, lbf·ft)
8 –
8 21 (2.1, 15)
8 26.4 (2.7, 19)
8 39.2 (4.0, 29)
8 30.8 (3.1, 23)
8 22.1 (2.3, 16)
10 9.8 (1.0, 7.2)
10 29.4 (3.0, 22)
8 26.5 (2.7, 20)
TORQUE
N·m (kgf·m, lbf·ft)
10 16 (1.6, 12)
14 10 (1.0, 7)
30 15 (1.5, 11)
7 23 (2.3, 17)
20 26 (2.7, 19)
14 30 (3.1, 22)
TORQUE
N·m (kgf·m, lbf·ft)
6 13 (1.3, 10)
GENERAL INFORMATION
N·m (kgf·m, lbf·ft)
4.2 (0.4, 3.1)
9.0 (0.9, 6.6)
10 (1.0, 7)
12 (1.2, 9)
12 (1.2, 9)
27 (2.8, 20)
39 (4.0, 29)
REMARKS
See page 2-18
Apply grease to the slid-
ing surface.
REMARKS
Apply engine oil to the
threads.
Apply engine oil to the
threads.
Apply engine oil to the
threads and seating sur-
face.
Apply engine oil to the
threads and O-ring.
REMARKS
CT bolt
1-13