Bearing Installation - Honda Transalp XL700V Manual

CRANKCASE/CRANKSHAFT/TRANSMISSION
BEARING THICKNESS:
O.S. E (Yellow): Thick
O.S. F (Pink):
O.S. G (Red):
A (Blue):
B (Black):
C (Brown):
D (Green):
After selecting new bearings, recheck the clearance
with a plastigauge. Incorrect clearance can cause
severe engine damage.

BEARING INSTALLATION

Apply engine oil to new bearing surface.
Set new bearings to the metal installer aligning its
side edge with the metal installer grooves.
TOOL:
Metal installer set
Set the bearings and special tools assembly on
inside of the crankcase, fitting the bearing edge in
the crankcase main journal.
Align the mating line of the bearings with the index
mark on the crankcase as shown.
Set the hydraulic press.
TOOL:
Metal installer set
12-18
Middle
Thin
070MF-MEG0200
070MF-MEG0200
IDENTIFICATION COLOR
Align
BEARING
BOLTS
METAL
INSTALLER SET
BEARING